Parking Lot Design Hacks | Pass the ARE 5.0

DOWNLOAD YOUR FREE CHEAT SHEET: https://designermasterclass.com/parki... Get Full Length Practice Exams: https://designermasterclass.com/all-p... Download our free ARE Playbook: https://designermasterclass.com/are-p...

Designer Masterclass

How to Replace a Concrete Walkway | Ask This Old House

Ask This Old House mason Mark McCullough replaces a concrete walkway with brick pavers.

This Old House

Regulating Traffic With Speed Bumps

Most drivers and pedestrians have encountered one or more types of speed bumps. There are several different types, each with its own specific purpose when it comes to traffic and parking lot management.

Street speed bumps, known as traffic calming features are designed to cause drivers to slow down significantly in order to go over them safely. Placed across the entire roadway, with a space on either side for drainage, the raised road surface is a bump in the road with heights typically ranging between three and four inches. The depth of the bumps are typically less than one foot. The bumps serve as a reminder to drivers to watch their speed and making it impossible to drive too fast through the areas in which traffic calming features have been placed.

Commercial speed bumps on streets and in parking lots tend to be larger and made of high impact materials, such as concrete or asphalt. They can have stripes or the entire surface painted in embedded reflective tape or highly visible paint colors, such as yellow or orange.

In residential areas, this type of traffic calming feature is used to reduce the rate at which the motor vehicle travels in high traffic or areas that have had racing or other traffic related problems. These bumps are typically smaller in size and are made of lower impact materials, such as recycled plastic or rubber. They may also be painted orange or yellow or embedded with reflective tape for easy visibility, day or night.

Speed humps are used for the same purpose as speed bumps, but they are designed to be driven over at rates of travel of up to twenty miles per hour without having to stop or slow down. This type of traffic calming feature is wider than the typical bump in that they are typically ten to fourteen feet in-depth. Unlike the smaller traffic calming devices, which are intended to make drives stop abruptly, speed humps are designed to encourage a gradual stop and to remind drivers to maintain the speed limit. Speed humps can be used for different traffic and parking situations; however, they are primarily used in residential areas.

Poorly designed raised road features can be hard to negotiate in vehicles with low clearance even at slow speeds. These traffic calming devices can also pose a hazard to motorcycles, bicyclists, and even pedestrians if not visibly marked. In some cases, the speed bump will be designed so that a break in the bump in the middle of the road allows two-wheel vehicles to pass without having to pass over the bump.

Controlling vehicle speed with a speed bump or speed hump is the most effective method to improve the safety of a parking lot, driveway or private lane. High visibility speed bumps and signs are the best way to communicate to drivers to keep their speed to a minimum.

*  *  *

Maureen McHale is a marketing consultant specializing in SEO and content management.

Article Source: https://EzineArticles.com/expert/M_McHale/676160

Article Source: http://EzineArticles.com/7481205

How parking lots can be danger zones

How dangerous can a walk through the parking lot be? Even though people tend to drive a lot slower, Kris Van Cleave reports on how the consequences of distraction and other driving mistakes can be deadly.

Asphalt Paving | Start to Finish

Asphalt Paving | Start to Finish

By Asphalt Contractors

ASPHALT OR CONCRETE? THE DIFFERENCES EXPLAINED!

Whenever construction-related topics are discussed, the use of asphalt VS concrete always creates a bit of controversy. This is especially true when the discussion focuses on paving. Even the word paving these days is used to describe mostly asphalt. But the truth is pavement is any material used to created roads or driveways. The most common modern paving methods, however, are asphalt and concrete.

Both asphalt and concrete have a long history in the building industry because of the variety of ways the materials can be used. However, in regard to paving parking lots and driveways, the biggest argument has mainly been about initial cost.

Now comes the inevitable question, "Which is the better material for parking lot and driveway surfaces?" The answer may surprise nearly everyone. And if you are a property or business owner, the results documented by industry experts as well as scientific studies are quite revealing.

According to Wikipedia, Discovery.com and Industry Sources, here are the latest findings. We'll start with Concrete Paving:

The Complete Details About Concrete Paving:

• - Concrete is more prone to cracking and buckling because it's rigid and dense design. Tree Roots, Ground Movements, Freeze Thaw Cycles, and soil movement are huge contributors to concretes deterioration.

• - According to the Ohio Highway Commission, concrete costs of $70 to $100 per cubic yard were more than double the costs of asphalt paving. All Ohio highway paving is now done with asphalt.

• - Concrete paving of parking lot and driveway surfaces requires more time and initial cost than asphalt paving. This holds especially true the larger a project gets.

• - Repairs to concrete paving surfaces are more costly to repair than asphalt. They also don't blend as well as asphalt paving does. Especially after asphalt gets freshly seal coated.

• + Concrete paving last far longer than asphalt paving surfaces.

• + Concrete paving maintenance cost over time, is far less expensive than asphalt paving.

• + Concrete paving requires far less on-going maintenance to keep its strength.

The Complete Details About Asphalt Paving:

• - Asphalt requires continual maintenance including seal coating, striping, crack filling, and many other forgotten costs when deciding what type of pavement to install.

• + Asphalt Paving offers more flexibility giving a slight advantage over concrete in terms of handling stress and cracking.

• -+ Asphalt is the easiest to use and most economical pothole repair product available. It can be applied as a cold patch, hot patch, and become a permanent solution for repairing potholes in a shorter amount of time than concrete and other more costly hybrid mixtures. Keep in mind that potholes are far less likely in concrete.

• + In addition to pothole repair, asphalt is used to repair parking lots, driveways, and roadways on a larger scale. The preparation for paving with asphalt is relatively easy, depending on the condition of the surface being covered. Asphalt paving can be done directly over the present pavement in many cases.

• + Asphalt is very strong, durable and weather resistant in addition to being resistant to damaging effects from chemicals

• - Only when the maintenance schedules are kept up.

• + Asphalt sets faster than concrete giving it a strong advantage in both cost and convenience for parking lot and driveway paving.

In summary,

Asphalt:

An environmentally friendly and recyclable paving product that provides many benefits for driveway, road, and parking area applications. With its upfront cost savings, it is by far the more popular choice for parking situations and driveway paving construction. However, those upfront savings are quickly lost within the first 5 years of installation through ongoing and costly asphalt construction projects.

Concrete:

Also highly green in its recyclable qualities. Concrete paving is a long lasting, low maintenance cost product which looks great over time. Although typically more difficult and slightly costlier to repair, when that time comes. Over time the cost to maintain a concrete pavement surface is much lower. Over the life span of 20-30 years, there will be even a larger saving on concrete constructed projects VS its asphalt counterpart.

Article Source: http://EzineArticles.com/expert/Scott_Flores/647793

Article Source: http://EzineArticles.com/4317975

Getting Your House Ready to Sell - Curb Appeal

Curb appeal is the first impression potential home buyers have of your house. If the outside of the home looks good, people will more than likely want to see what the inside is like. Following are tips for ensuring the outside of your home is attractive for potential home buyers.

Landscaping

Make sure your landscaping is at least average in comparison to other homes in the neighborhood. If it isn't, buy a few bushes and plant them. Don't worry about investing in trees or expensive landscaping propositions. Planting immature trees does not add much to the value of a home and you are not likely to get your investment back. Consider planting some flowers to add color (no bulbs or seeds since they won't grow in time to show the house).

Keep your lawn evenly cut and edged, well-watered and free of brown spots. Fix any problem areas before working on the inside of your house to allow these areas some time to grow. Rake up loose leaves and grass cuttings.

Home Exterior

To paint or not to paint? Take a look at your house from across the street. Does it look tired or faded? If so, it may be wise to paint and spruce up the appearance of the house. You are likely to receive your investment back. If you opt to paint, be sure to pick a color that fits well within the neighborhood. If you opt not to paint, consider washing the exterior of the house. Clean the windows inside and out and remember to check the gutters and chimney.

Roof

If you know your roof leaks, repair it. If you don't repair it, you will have to disclose this information to the buyer who will want a new roof. Roof issues may potentially come up during the inspection as well.

Backyard

Make sure your backyard is tidy. Keep the kids toys cleaned up. If the lot size is small, you may consider removing swing sets or forts to give it the appearance of being more spacious. If you have pets, be sure the lawn is constantly clear of "debris." If you have a pool or spa, keep is well-maintained and constantly clean.

Front Door

The front door is the entryway into the home. Refinish or repaint the door as needed and ensure the door fixture stays polished.

Driveway

Keep your driveway clean and clear. Store RVs or old cars elsewhere while the house is on the market. Consider re-sealing an asphalt driveway.

Hilary Basile is a writer for MyGuidesUSA.com at [http://www.myguidesusa.com], you will find valuable tips and resources for handling life's major events. Whether you're planning a wedding, buying your first home, anxiously awaiting the birth of a child, contending with a divorce, searching for a new job, or planning for your retirement, you'll find answers to your questions at MyGuidesUSA.com.

Find tips and resources for buying and selling a home at [http://buyingandsellingahome.myguidesusa.com]

Article Source: https://EzineArticles.com/expert/Hilary_Basile/78760

Article Source: http://EzineArticles.com/480414

How to Extend a Driveway with Asphalt | Ask This Old House

In this video, This Old House mason Mark McCullough helps a homeowner add an extra parking spot to keep their vehicles off of a very busy street. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. Adding a parking spot to a driveway can increase the driveway’s usefulness, keep the vehicle safe and away from busy streets, and even provide an extra spot for repairs. And while it’s not exactly a DIY project, it’s helpful to understand the steps on how extending a driveway with asphalt is done. You Might Need Permission In many municipalities, the sidewalk and even some of the yard may belong to the town. Adding a parking space that may affect the town’s property will require permission. On top of that, the town may require a permit. While neither item is usually a big deal, homeowners should do their due diligence and check with the town first. Hire an Asphalt Contractor Asphalt requires special equipment, techniques, and knowledge, so it’s best to hire a contractor. Knowing how to slope the 300-degree asphalt before it hardens is critical, else there can be low spots that collect water or rain may run off in the wrong direction. Mark the Utilities Installing an asphalt driveway requires some excavation, and contractors need a general idea of where the utilities lie. For this reason, asphalt companies will call utility marking agencies to come out and mark the yard wherever the gas, sewer, water, or underground electricity travel under the yard. Where to find it? Mark recruits the help of a local asphalt contractor to install a parking spot for a homeowner on a busy street. Contact utility locating services in preparation for any project that requires digging. Once water, gas, and sewer lines that run underground are identified and marked, it’s safe to proceed on to digging. To prep the space the crew will dig down about 15” to get below the frost line and use a specialty compactor, called a drum vibratory roller, to compact the soil to establish a solid base. Add a layer of crushed added for proper drainage. Pour the asphalt base and surface layers, compacting between each layer. Visit the Better Business Bureau [https://www.bbb.org/] website to find reputable asphalt companies near you. The asphalt is sealed with a product manufactured by Pioneer Sealcoat, LLC. [https://www.pioneersealcoat.com/] Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: https://bit.ly/2GPiYbH Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: https://www.thisoldhouse.com/pages/st...

All of the Benefits of Sealcoating Asphalt Pavement

Here's why that driveway sealer project shouldn't be at the bottom of your to-do list.

For new homeowners who aren't familiar, sealcoat (or pavement sealer) is a liquid coating mixture that's usually applied to asphalt-based pavement. When moving into your new house, fixing the driveway might not be high on your list of priorities. In fact, you might even be asking yourself: Is sealcoating really necessary for my home?

If you’ve made an investment by purchasing a house, you want to take great care of it, right? You spend hours picking the perfect colors to match your sheets, and every Sunday you bring out the vacuum to suck dirt and debris. You might even spend money trimming your trees and bushes to keep them looking lovely.

When you think about it, your driveway takes up much of your front yard. A cracked, dirty, and faded driveway just doesn’t match with clean, polished cars. Here are some reasons why you should invest in a sealcoat for your driveway.

1. Maintain its Appearance
Your driveway takes up space. It’s where cars are parked and where children play during the sweltering summer months. If it isn’t well-maintained, it can have a detrimental effect on your house’s appearance. Asphalt driveways are prone to cracking, fading, and other signs of distress. It doesn’t look good to anyone! Cracks in the asphalt can even lead to accidents.

A sealcoat sits on top of a driveway and acts as a barrier for it. Its deep black color looks regal and strong. The coat prevents water, car fluids, water, the sun, salt, and other chemicals from warping the color or eating away at the driveway. And a sealcoat will prevent weeds from growing in the asphalt. That means no more getting down on hands and knees just to clean those irritating weeds!

New sealcoat, when applied, looks bold and dark. It improves the appearance of both new and old asphalt, adding a pop of vibrancy to your house that you may not have expected.

2. Prevent Cracks
Sometimes, your new home comes with cracks in the pavement. You might be inclined to think, “Well, the previous owner seemed just fine with these cracks. The driveway looks good enough.” Don’t settle for mediocrity—you deserve the best!

Water that seeps into the base material can cause small cracks to widen. Sealcoating your driveway properly will prevent that. Any minor cracks and rough patches can be smoothed over, and if there's any dirt on your driveway, the rain can easily wash it away. That's because sealcoat is a non-porous, smooth surface.

3. Protect the Asphalt
The sun can burn our skin, but did you know it can also harm your driveway? Surface voids on asphalt can absorb oxygen and UV rays. The radiation from the sun can warp the asphalt and cause the color to fade quickly. On top of that, pockets of surface void allow oil or gas to penetrate.

Chemical spills can also worsen your driveway's condition. With a thick layer of sealcoat, you'll be able to prevent (or at the very least, minimize) the harmful effects of spills and the sun. By lowering the rate of water absorption (the water will run right off), sealcoating minimizes the risks of damage due to water, snow, and freezing. There are many things that can destroy your driveway: gas, diesel fuel, salt, chemicals, oil, and ice. It's better to prevent these from attacking your driveway so that you won't have to risk costly damage control.

4. It's Strong
Sealcoat helps attract heat from sunlight and becomes more pliable when hot. Instead of the asphalt cracking at high temperatures, the sealcoat will mold to shape. If you have guests over, the asphalt won’t waver under the combined weight of the cars. That’s because the sealcoat will be there to protect it.

5. It Saves Money
Sealcoating can be done as a weekend DIY project, or you can hire someone to do it for you. A DIY sealcoat project should cost about $50 to $200. It all depends on the size of your driveway. On the other hand, hiring a professional is probably safer. It would cost about $200 to $500. If you choose to hire a company or a person, you can be assured that they'll be more familiar with good products. Different products work better in certain areas (because of the temperature and climate), and a professional will know which sealants are best avoided.

Whether you choose to do it yourself or hire someone else, sealcoating your driveway is far cheaper than spending hundreds of dollars trying to repair or even replace your driveway's asphalt!

If you allow moisture to seep into the driveway, you might not notice at first. But after weeks, the quickened deterioration will begin to show as your asphalt becomes more and more distressed. It’s much easier to prevent the issues instead of scrambling to find someone who can quickly fix the asphalt! Just make sure that you wait 90 days after setting a new asphalt driveway to apply the sealcoat.

Article Source: https://housetipster.com/housetips/1151/5-benefits-of-sealcoating-asphalt-pavement

Vaca Vet Striping Specializes In Striping For Small Or Large Jobs

https://vacavetstriping.com/

Vaca Vet Striping offers a full range of parking lot and road services, we strive to improve quality through innovation, technology, and our vast experience. Our fleet of service trucks and professional parking lot stripers allows us to perform jobs in a timely manner.

About Our Process
Vaca Vet Striping has the latest equipment and products to ensure the highest quality in painting clean, sharp lines and well defined edges.

Our Striping Services Included

• Parking stall lines
• Directional arrows
• Handicap stalls
• Paths of travel
• No parking
• Fire zones
• Entrance / Exit signage