Why Landscaping Experts Recommend Asphalt Sealcoating

Creating a driveway on your property is important to help you protect your lawns. However, when creating driveways or pathways, it is imperative that you make use of durable materials like asphalt.

As of now, asphalt driveways and pathways are very popular. However, there are cases when homeowners may notice unsightly issues. Thus, landscaping experts recommend homeowners to opt for asphalt sealcoating. With this solution, homeowners can obtain wonderful features that can benefit them. Below are some of the following.

To prevent small cracks

One of the reasons why landscaping experts recommend asphalt sealcoating is to prevent small cracks. Cracks on asphalt are caused by numerous factors. These include moisture, ground movements and erosion, excessive weight as well as improper installation. Fortunately, cracks can be eliminated by using sealcoating. This solution can also hide patches and rough areas.

To reduce damages caused by chemicals

The next reason why landscaping experts recommend asphalt sealcoating is to reduce damages caused by chemicals. This is possible since asphalt sealcoating fills surface voids, which reduces exposure to oxygen and UV rays and reduces the depth to which oil or gas can penetrate the asphalt. Other than that, sealcoating can also prevent oxidation and erosion of the top layer and replaces fine particles lost from the asphalt surface due to oxidation on older pavements. And, it also resists gas, diesel fuel, oil, salt and chemical penetration which will break down the bond between the aggregate and the liquid asphalt.

To eliminate water damage

Using asphalt sealcoating can also help homeowners eliminate water damage. Water can easily damage asphalt since it enters the asphalt. Because of this, moisture can be formed which can affect the quality and reliability of asphalt. By using sealcoating, you can prevent water from entering the asphalt since it can protect the surface properly.

To improve aesthetics

With the use of sealcoating homeowners can also improve the aesthetics of their asphalt. Due to aging, the color of the asphalt fades. However, sealcoating can protect its color since this solution is dark and black colored when applied.

To reduce maintenance costs

Finally, landscaping experts can also reduce their maintenance costs when using sealcoating. When it comes to repairs, asphalt repairs can be expensive since you need to hire specialists in order to properly remove cracks and other asphalt issues. On the other hand, sealcoating can easily leave a smooth, clean surface ideal for sweeping, which lowers cleaning costs and for a driveway and gives your entrance a fresh and new look.

These are only some of the benefits that homeowners can obtain when investing in sealcoating solutions from reliable landscaping experts.

Article Source: http://EzineArticles.com/expert/Johnny_Carlino/1802518

Article Source: http://EzineArticles.com/9765756

3 Types of Damage Asphalt Sealing Prevents

Asphalt sealing is an important part of maintaining a driveway or parking lot made of this material. It should be performed every two to three years to protect the pavement from developing damage that could shorten its life span. If you miss this maintenance, you could develop one or more of the issues below.

What Can Happen When You Skip Asphalt Sealing

1. Freeze-Thaw Expansion & Fracturing
The winter can be absolutely brutal on asphalt, particularly due to the freeze-thaw cycle. This occurs when water seeps down into the pavement, freezes, and expands — resulting in cracks. As the water thaws, it will then creep even deeper into the material, repeating this process and leading to numerous fractures. Asphalt sealing prevents this by covering any small cracks in the material and keeping water out year-round.

2. Sun Drying
asphalt sealing cookeville tnWhen the sun’s harmful ultraviolet rays beat down on asphalt, they damage it in a way similar to how they affect your skin. The chemical bonds in the pavement begin to deteriorate, leading to cracks and other damage on the surface. Asphalt sealing prevents this by covering the blacktop in anti-oxidation additives and other aggregates that act as a barrier.

3. Surface Softening
Since asphalt pavement is predominantly used by vehicles, it will most likely experience some auto fluid spills. When oil, gas, and similar liquids fall onto the surface, they will be absorbed by the asphalt and cause it to soften. While these spills can be easily cleaned up in most cases, overtime they can result in cracks or a deterioration of the aggregates comprising the blacktop.

Article Source: https://nearsay.com/c/516510/215844/3-types-of-damage-asphalt-sealing-prevents

Happy Thanksgiving

Give thanks for a little, and you will find a lot. 

-Hausa Proverb

How to Choose an Asphalt Contractor

There are several things to consider when you are choosing the contractor to do any paving or other related services around your home or business. It is very important to get written estimates from several different contractors. You can usually find a list of contractors in your area via the internet or a local phone book.

The contractors should come out and evaluate the overall site conditions, as well as take measurements, and get with you regarding any questions or concerns that they might have. The contractor should be able to provide you with a certificate of insurance for both general liability and worker's compensation coverage. This will help protect your property and assets in the event someone is injured while working on your property.

Your contractor should also be able to present you with a list of references from previous jobs completed. Finally, it is always a good idea to get an understanding of the materials that will be used for the project. This will help you make sure you are comparing "apples to apples" and getting exactly what you are paying for.

Once your contractor has been selected, it is now time to discuss the scheduling and the estimated time frame necessary to complete the job. Keep in mind that equipment will be used for your paving project. Therefore, you will need to make any and all preparations for temporary parking or a possible plan to re-route foot traffic to your home or business.

Lastly, make sure your contractor calls for a utility locate before any digging or excavation takes place. This will help to insure that no utility lines are cut and that service is not interrupted.

By taking these easy steps, your Asphalt Paving Contractor that you have chosen should be able to provide you with a good quality service.

Peyton Stallings is a lifetime Atlanta resident and general contractor. Peyton is President and onsite manager for PKS Paving And Construction and writes regular columns on, paving, Asphalt Paving Atlanta and construction in general. To learn more please visit our site at http://www.pksasphaltpavingatlanta.com

Article Source: http://EzineArticles.com/?expert=Peyton_Stallings

Article Source: http://EzineArticles.com/5856498

All of the Benefits of Sealcoating Asphalt Pavement

Here's why that driveway sealer project shouldn't be at the bottom of your to-do list.

For new homeowners who aren't familiar, sealcoat (or pavement sealer) is a liquid coating mixture that's usually applied to asphalt-based pavement. When moving into your new house, fixing the driveway might not be high on your list of priorities. In fact, you might even be asking yourself: Is sealcoating really necessary for my home?

If you’ve made an investment by purchasing a house, you want to take great care of it, right? You spend hours picking the perfect colors to match your sheets, and every Sunday you bring out the vacuum to suck dirt and debris. You might even spend money trimming your trees and bushes to keep them looking lovely.

When you think about it, your driveway takes up much of your front yard. A cracked, dirty, and faded driveway just doesn’t match with clean, polished cars. Here are some reasons why you should invest in a sealcoat for your driveway.

1. Maintain its Appearance
Your driveway takes up space. It’s where cars are parked and where children play during the sweltering summer months. If it isn’t well-maintained, it can have a detrimental effect on your house’s appearance. Asphalt driveways are prone to cracking, fading, and other signs of distress. It doesn’t look good to anyone! Cracks in the asphalt can even lead to accidents.

A sealcoat sits on top of a driveway and acts as a barrier for it. Its deep black color looks regal and strong. The coat prevents water, car fluids, water, the sun, salt, and other chemicals from warping the color or eating away at the driveway. And a sealcoat will prevent weeds from growing in the asphalt. That means no more getting down on hands and knees just to clean those irritating weeds!

New sealcoat, when applied, looks bold and dark. It improves the appearance of both new and old asphalt, adding a pop of vibrancy to your house that you may not have expected.

2. Prevent Cracks
Sometimes, your new home comes with cracks in the pavement. You might be inclined to think, “Well, the previous owner seemed just fine with these cracks. The driveway looks good enough.” Don’t settle for mediocrity—you deserve the best!

Water that seeps into the base material can cause small cracks to widen. Sealcoating your driveway properly will prevent that. Any minor cracks and rough patches can be smoothed over, and if there's any dirt on your driveway, the rain can easily wash it away. That's because sealcoat is a non-porous, smooth surface.

3. Protect the Asphalt
The sun can burn our skin, but did you know it can also harm your driveway? Surface voids on asphalt can absorb oxygen and UV rays. The radiation from the sun can warp the asphalt and cause the color to fade quickly. On top of that, pockets of surface void allow oil or gas to penetrate.

Chemical spills can also worsen your driveway's condition. With a thick layer of sealcoat, you'll be able to prevent (or at the very least, minimize) the harmful effects of spills and the sun. By lowering the rate of water absorption (the water will run right off), sealcoating minimizes the risks of damage due to water, snow, and freezing. There are many things that can destroy your driveway: gas, diesel fuel, salt, chemicals, oil, and ice. It's better to prevent these from attacking your driveway so that you won't have to risk costly damage control.

4. It's Strong
Sealcoat helps attract heat from sunlight and becomes more pliable when hot. Instead of the asphalt cracking at high temperatures, the sealcoat will mold to shape. If you have guests over, the asphalt won’t waver under the combined weight of the cars. That’s because the sealcoat will be there to protect it.

5. It Saves Money
Sealcoating can be done as a weekend DIY project, or you can hire someone to do it for you. A DIY sealcoat project should cost about $50 to $200. It all depends on the size of your driveway. On the other hand, hiring a professional is probably safer. It would cost about $200 to $500. If you choose to hire a company or a person, you can be assured that they'll be more familiar with good products. Different products work better in certain areas (because of the temperature and climate), and a professional will know which sealants are best avoided.

Whether you choose to do it yourself or hire someone else, sealcoating your driveway is far cheaper than spending hundreds of dollars trying to repair or even replace your driveway's asphalt!

If you allow moisture to seep into the driveway, you might not notice at first. But after weeks, the quickened deterioration will begin to show as your asphalt becomes more and more distressed. It’s much easier to prevent the issues instead of scrambling to find someone who can quickly fix the asphalt! Just make sure that you wait 90 days after setting a new asphalt driveway to apply the sealcoat.

Article Source: https://housetipster.com/housetips/1151/5-benefits-of-sealcoating-asphalt-pavement

Regulating Traffic With Speed Bumps

Most drivers and pedestrians have encountered one or more types of speed bumps. There are several different types, each with its own specific purpose when it comes to traffic and parking lot management.

Street speed bumps, known as traffic calming features are designed to cause drivers to slow down significantly in order to go over them safely. Placed across the entire roadway, with a space on either side for drainage, the raised road surface is a bump in the road with heights typically ranging between three and four inches. The depth of the bumps are typically less than one foot. The bumps serve as a reminder to drivers to watch their speed and making it impossible to drive too fast through the areas in which traffic calming features have been placed.

Commercial speed bumps on streets and in parking lots tend to be larger and made of high impact materials, such as concrete or asphalt. They can have stripes or the entire surface painted in embedded reflective tape or highly visible paint colors, such as yellow or orange.

In residential areas, this type of traffic calming feature is used to reduce the rate at which the motor vehicle travels in high traffic or areas that have had racing or other traffic related problems. These bumps are typically smaller in size and are made of lower impact materials, such as recycled plastic or rubber. They may also be painted orange or yellow or embedded with reflective tape for easy visibility, day or night.

Speed humps are used for the same purpose as speed bumps, but they are designed to be driven over at rates of travel of up to twenty miles per hour without having to stop or slow down. This type of traffic calming feature is wider than the typical bump in that they are typically ten to fourteen feet in-depth. Unlike the smaller traffic calming devices, which are intended to make drives stop abruptly, speed humps are designed to encourage a gradual stop and to remind drivers to maintain the speed limit. Speed humps can be used for different traffic and parking situations; however, they are primarily used in residential areas.

Poorly designed raised road features can be hard to negotiate in vehicles with low clearance even at slow speeds. These traffic calming devices can also pose a hazard to motorcycles, bicyclists, and even pedestrians if not visibly marked. In some cases, the speed bump will be designed so that a break in the bump in the middle of the road allows two-wheel vehicles to pass without having to pass over the bump.

Controlling vehicle speed with a speed bump or speed hump is the most effective method to improve the safety of a parking lot, driveway or private lane. High visibility speed bumps and signs are the best way to communicate to drivers to keep their speed to a minimum.

*  *  *

Maureen McHale is a marketing consultant specializing in SEO and content management.

Visit ABC Paving and Sealcoating for more information about traffic calming devices.

Article Source: https://EzineArticles.com/expert/M_McHale/676160

Article Source: http://EzineArticles.com/7481205

The Correct Way to Repair an Asphalt Parking Lot

There are many contributing factors that make asphalt a great material to use when paving a parking lot or an asphalt driveway. It is a relatively inexpensive material when compared to other material such as concrete or concrete paving blocks. Asphalt is a very durable product that stands up well to basic wear and tear of vehicle and foot traffic. Another great reason to use asphalt for your paving needs is that asphalt is a green product that is recycled more often than any other paving product.

Here are a few tips that will help you if you already have an asphalt driveway or parking lot surface that is in need of repairs. Although asphalt will need maintenance from time to time, it will only help in keeping future repair cost down to a minimum. If you are trying to do your own maintenance repairs, you will want to complete the repairs properly in order to get the maximum life out of your pavement. If you are hiring a contractor to handle the repairs for you, a little education on what to look for will help you choose the right contractor and also help you know what to look for once they're on the job.

Asphalt maintenance should be done periodically as needed. Sealcoating is one way to protect against water undermining the asphalt and reaching the base material beneath the asphalt. Ultraviolet rays can break down the binder material in asphalt allowing it to become brittle and fall apart. Sealcoating will give your asphalt surface protection against the ultraviolet rays. Sealcoating should be mixed to the proper specifications and should not be diluted to in order to stretch out the product. This will not give the asphalt the same protection. The first coat can be sprayed on to ensure the material gets into the smaller cracks to seal off and stop any future water penetration.

If you have areas in your asphalt pavement that have potholes or noticeably large alligator cracks you may need to remove these areas in order to repair them correctly. The first step in this process is to cut out the affected area with a saw. Next, you will need to remove any excess materials from the affected area. Once the area is cleaned of any debris, apply a tach coat to make the new hot asphalt adhere to the cut-out area. Then apply the new asphalt, and always make sure to compact the newly installed asphalt.

Article Source: http://EzineArticles.com/expert/Peyton_Stallings/832472

Article Source: http://EzineArticles.com/6173735

Second Time Customers Get Discounts

Do You Know The Advantages of Sealcoating?

Stay safe before, during and after an earthquake. Use these 7 steps to protect you and your family.

Protect Your Parking Investment!

Asphalt Maintenance

Asphalt pavement is commonly used on many different projects. It is a popular material due to its cost-effectiveness, durability, ease of implementation and is great at withstanding heavy loads. It can be used for walkways, driveways, parking lots and complete roadways. Many may not know that asphalt does require inspections and routine maintenance for long life. Common asphalt maintenance procedures are as follows:

Asphalt Maintenance Facts

Asphalt has a long life span as long as proper maintenance is performed. Asphalt deterioration begins as soon as the freshly laid asphalt begins to cool. Oil, sun oxidation, salt, water penetration, weather all affect the life span.

Asphalt Repair and Patching

Patching is a frequently used repair technique for imperfections such as potholes. Potholes can be formed by the freezing and thawing of water in unsealed or improperly sealed cracks. As the ice forms, it expands and damages the surrounding asphalt leaving voids and thus a pothole is born. The process of replacing the asphalt depends on the affected area and the seasonal conditions.

Asphalt Resurfacing or Overlaying

In some cases, it can be more cost effective to resurface or overlay the asphalt. Good candidates for resurfacing are low spots, large sections of interconnecting cracks. This process is unique to each job and can consist of leveling of low spots, grinding off uneven surfaces, adjusting drainage paths and other details pertaining to the specific problem.

Asphalt Removal and Replacement

Without ongoing maintenance, asphalt surfaces can degrade until the only option is a replacement. Proper procedures must be followed to ensure the repair and replacement surface last. Cost varies depending on the job.

Article Source: http://EzineArticles.com/?expert=Bud_Altman

Article Source: http://EzineArticles.com/5291686

6 Reasons To Get Your Parking Lot Re-Striped

Asphalt pavements and parking lots should be line striped as soon as they are completed. Asphalt striping involves the application of lines or markers on any asphalt surface for various reasons. The main reason for asphalt striping is to mark designated lanes on roadways. Asphalt striping is also used to mark entrances, crosswalks, and other safety features on pavements. Parking lot striping is very important to divide the parking lot into various parking spots. The most recommendable line striping technique is thermo striping. This is where the asphalt surface is marked or striped using molten thermoplastic. You can also use various paints to stripe your asphalt pavements, roadways, or parking lots. But thermoplastic striping is far much functional and durable than paint marking or striping.

After any asphalt surface is marked or striped, the lines or marks will last for some years before they start fading away. You should make a point of restriping your fading asphalt parking lot or pavement as soon as possible. Line striping is especially important for commercial parking lots, which means that restriping is also very important for your commercial parking lot. Here are several reasons why you need to restripe your commercial parking lot whenever the markers or stripes fade.

Aesthetic And Professional Appeal
A freshly marked or striped asphalt surface is very appealing. Road construction companies use various bright colors to mark an asphalt pavement o parking lot. Your commercial parking lot can be marked using white or yellow stripes. Different colors can be used to designate special parking spots for the disabled. Restriping your asphalt parking lot will enhance the curb appeal in your commercial building. This will project a professional image of your enterprise thereby attracting more customers or clients.

Better Parking Space Management
The main reason for striping an asphalt parking lot is to organize or manage the parking space. The stripes will indicate various parking slots in your commercial parking lot thereby ensuring that all the workers and customers have ample parking space. Restriping your parking lot will help organize the parking spaces in a much more efficient way.

Safety
A well-striped parking lot is safer to use. There are no collisions as vehicles try to find parking areas. You simply park your car in any allocated parking spot. You should make a point of restriping your parking lot to avoid accident-related liabilities.

User Satisfaction
When you designate various parking spots in your commercial parking lot, all users will be happy and satisfied. Remember that your commercial parking lot serves many people including your workers, delivery and supply vehicles, and more importantly your clients. That is why you should request striping services as soon as the stripes in your parking lot start fading.

ADA Compliance
Another major reason for striping and restriping a commercial parking lot is to comply with the Americans with Disabilities Act (ADA). ADA requires the allocation of a specific number of parking spots for the handicapped. You should restripe your commercial parking lot to adhere to these rules and regulations.

Fire Code Compliance
All commercial parking lots should have a designated lane for fire emergencies. This is a legal requirement for safety purposes. It’s one very important reason to restripe your commercial parking lot to ensure fire code compliance.

Article Source: http://pickensconstruction.com/6-reasons-to-get-your-parking-lot-re-striped/