Do You Know The Advantages of Sealcoating?

With warm weather, comes maintenance and repairs to parking lots and driveways. Sealcoating your parking lot or driveway is an easy way to extend the life of asphalt and improve the curb appeal of your property - saving you money in the long run. If sealcoating is avoided, a crack can start forming in the asphalt, which then leads to potholes.

Some benefits of sealcoating asphalt include:

• Reduces long term repair costs
• Accelerates melting of snow and ice on the pavement surface
• Protects your pavement from oxidation, oil and chemical spills
• Protects against water penetration, rain, frost and snow damage
• Enhances the appearance of your building and landscape
• Prolongs pavement life, safeguarding your investment

Article Source: https://www.wolfpaving.com/advantages-of-sealcoating

The Importance of Parking Lot Line Painting and Pavement Marking

In business today it's important to be professional. This includes the upkeep of property maintenance inside and outside of the business. Parking lot line painting is one of the most important aspects of external property maintenance and this article explains three excellent reasons why.

1) Appearance

The parking lot of a business acts as a welcome mat for customers and can often act as a first impression to new clients. If the parking lot pavement markings are worn and barely visible it may give the impression to some clients that the owners are irresponsible or that they don't care about the way their property looks. Parking lots simply look better with a fresh coat of high grade traffic paint on the stall lines, handicap symbols, arrows, speed bumps and any other pavement markings the lot might have. When line painting is done it allows that mat to say "welcome" again.

2) Parking Organization

If there is no visible lines to indicate parking spaces in a parking lot, people will park anywhere and everywhere they can fit their vehicle. This is not good since it increases the chance of people getting boxed in and unable to get out of the lot. When parked vehicles are in disarray it can also increase the chance of dings and scratches to vehicles if navigation around the lot is tight and difficult. Parking stalls and drive lanes have regulated sizes for these reasons and a nicely painted lot keeps the parked traffic organized and moving vehicles can be driven through the area safely and easily.

3) Space Maximization

I can't count the number of times I've seen 20 vehicles in a "full" parking lot that could easily fit 24 or 25 automobiles if it had been given the correct line painting job done. It doesn't seem like much but let's say it's a restaurant that averages $50.00 per bill. That adds up to about $200.00 - $250.00 in revenue. This to me would be the most frustrating parking problem for the business owner since most of the time if people can't park at the establishment, they don't shop there either. Painting proper stall lines allows optimal space maximization that fits as many vehicles as the parking lot can safely manage.

These are three basic problems that can be easily avoided if the correct pavement markings are applied to the lot. As long as parking lot line painting is done by professionals it can be one of the quickest and effective aspects of external property maintenance.

Article Source: http://EzineArticles.com/?expert=Shannon_D_C

Article Source: http://EzineArticles.com/6818160

Choosing Asphalt or Concrete

Asphalt or Concrete? This is a segment that was aired on the HomeWoRx television show with Gary Sullivan on network TV in Cincinnati, Ohio. Hear the pros and cons of installing an asphalt or concrete driveway.

Vaca Vet Striping has got you covered. We have over 30 years experience doing business as ACE Paving Company, with a General Engineering Class A Contractor’s License #389714. We strive to provide quality work and great service at an affordable cost. Vaca Vet Striping service area is Solano, Napa, Yolo, and Sacramento counties.

https://vacavetstriping.com/

Four Areas of Asphalt Maintenance

When looking at asphalt maintenance it can be divided into four areas. The primary cause of asphalt failing is the penetration of water into the asphalt base. Over time, it will become brittle and dry with the aggregate beginning to wear away and cause cracks that will let water penetrate into the base of the pavement. When the water seeps into the crack it causes the base material to move and settle. This leads to the surface cracking in a pattern that is grid-like When the payment has reached this stage there are only two options, which replace the old asphalt or patch repair it.

Patch repair

It deals with areas that are isolated. Using a backhoe and saw-cutting the pavement is removed. They can also use a grinding machine. Once the old asphalt is removed, it is replaced with new asphalt. The removal method determines the amount that is removed. The removal depth should be equal to one point five times the original thickness of the asphalt. You may also have to replace the base-rock to match the adjacent areas to allow for base support that is uniform. The amount of removal should be extended twelve inches past the area that failed.

Asphalt overlay

This asphalt maintenance is affordable and provides a new wearing surface. When dealing with asphalt overlay there is a certain factor you need to be aware of, which include:

• Overlay thickness-it should be a maximum of two point five inches with a minimum of one point five inches
• Smooth transitions-when you are considering where to grind the existing pavement down remember not to grind down the overlay section to match the existing structure. If you do this could weaken the strength of the overlay. They will grind the existing payment down to where they meet flush together to prevent this.

Inlay and pulverize in place

Both of these areas of asphalt maintenance are accomplished using a milling machine. During the process of inlay, it removes a depth of the existing asphalt, which is many times a previous overlay. This will let the contractors put the asphalt back to the pre-inlay elevation. The method of pulverize-in-place will reduce all of the asphalt to particles that are base-rock size.

Seal coating

This is an important part of extending the life of the asphalt and it should not be overlooked. Seal coating is a mixture of mineral fibers, emulsified asphalt, and water along with other admixtures. This will seal the top layer of asphalt to prevent water from penetrating the pavement surface and protecting the top layer from wear from sun exposure and oxidation. It is what gives the asphalt its even black surface.

Article Source: http://EzineArticles.com/expert/Lora_Davis/2146280

Article Source: http://EzineArticles.com/9674163

5 Reasons to Repair Your Asphalt Parking Lot

While a small crack or pothole in your asphalt parking lot may not seem like a big deal, think again.

Not only can small asphalt cracks and potholes grow into more expensive repairs, but they can also affect your liability as a business owner.

In this blog post, we will go over the five reasons you should hire an experienced Clarkston asphalt repair contractor at the first sign of damage to your commercial parking lot.

1. Avoid Liability
As a commercial building owner, you need to keep your parking lot well-maintained to avoid being sued. If a customer damages their vehicle or suffers personal injury because of large potholes and cracks in your parking lot, you will be held legally responsible. It is your responsibility to keep your parking lot safe and functional for customers. To repair asphalt potholes, you’ll need to call an asphalt paving contractor.

2. Prevent Potholes and Cracks
Did you know that asphalt expands and contracts with fluctuating temperatures? If you don’t invest in proper asphalt parking lot maintenance, you could end up paying to repair parking lot cracks. Cracks in your parking lot will eventually weaken the structure, making asphalt potholes more likely. Not only are cracks and potholes an eyesore, but they can also decrease the number of usable parking spaces in the lot.

3. Save Money
Making small repairs to your parking lot is less expensive than having to prematurely replace your parking lot. When you invest in parking lot maintenance, you won’t have to worry about your asphalt pavement deteriorating over time. No one wants to pay for parking lot replacement if it can be held off. If you take proper care of your parking lot, there’s no reason it shouldn’t last for up to 20 years.

4. Attract Business
Nothing detracts from the curb appeal of your commercial building more than a crumbling parking lot. If your business depends on being able to bring in new clients or encourage repeat business, you’ll need to focus on setting a good first impression as soon as they pull into the lot. Customers will become frustrated if they aren’t able to find a usable parking space due to potholes. Potential clients might also assume that the condition of the parking lot is representative of how you run the rest of your business.

5. Increase Property Value
If you plan on selling your commercial property in the near future, you’ll want to improve the appearance of your asphalt parking lot. Potential buyers will judge the property as soon as they pull into the parking lot and won’t be impressed by large cracks and potholes. Buyers don’t want to immediately pay for asphalt parking lot replacement after buying a property. In other words, significant parking lot damage decreases the value of your property and makes it harder to sell.

Article Source: https://www.alliedasphalt.com/5-reasons-to-repair-your-asphalt-parking-lot.php

Pavement Striping By Vaca Vet Striping

Striping

We specialize in pavement striping for shopping centers, business complexes, apartments, and private roadways. Whether you have a small job of just two parking stalls or a multi-acre parking facility, V.V.S. will provide professional and timely work.

See more at https://vacavetstriping.com/striping/

Call us at 707-592-8331

More Than Just Price - Choosing a Paving Contractor to Install Your Driveway

Paving an asphalt driveway may seem like a simple task to some people. Basically, you just get a couple of companies out of the phone book to give you an estimate and then pick the cheapest one right? Well, not if you're concerned about the craftsmanship or making sure you get what you pay for. This is the number one mistake people make when choosing a contractor. Before you call any company do some research first. Information is readily available 24 hours a day on the web. Stay away from people that knock on your door. You will never ever get a good job from someone telling you he has an extra load of asphalt from a job up the street. These people are called travelers and never deliver on what they promise. There is plenty of info on the web regarding these types of people.

Try to zero in on companies that specialize in residential asphalt drives. Commercial contractors excel in putting down lots of asphalt really fast, but usually, fall short of a homeowner's expectations when it comes to details. Review a company's website, check them against the BBB or other reporting agencies, and compare your notes about your research. When you look at their website, be sure to pay really close attention to the details you find both in the content and in the pictures on the site. You want to see what kind of work they are capable of, and you want to be confident they fully know what they are doing. You'll also be able to make sure they have adequate equipment if they have good pictures. Once you have 1-3 good companies with a clean history and a good reputation now is the time to talk to them and request a bid. Always get a written proposal. This makes sure both parties' expectations are clear and known. It also helps protect you if a legal matter ensues.

When reviewing the bids pay close attention to the entire proposal; including the letterhead that it's composed on. Sloppiness or inadequacies on paper now may be what you'll get on your asphalt driveway too. Be sure that everything you expect from your paving project is included in the scope. Make sure you understand everything that is taking place. Be sure you understand how the job will be scheduled, how thick the driveway will be after the asphalt is compacted, how much rock will be installed prior to paving, and the dimensions or square footage. Signing a contract means you have accepted what is in writing. If something is left out, make sure you get an amended contract.

Before you sign a contract you should take some time and use good judgment to compare the estimates. Price should never be your number one concern. We'll discuss price in a moment. Take an opportunity to ask a contractor for referrals that best match the design of your job. Some companies keep a cheat sheet of their best referrals, but you should insist they provide you with 1-2 jobs nearby that best match your own asphalt driveway. You want this because you should be inclined to physically investigate what kind of work they do. Ask about jobs they might be doing in the area so you can personally witness them while in action.

How do you know what to look for when looking at a referral driveway that a company has already completed? Here are a few great tips that will bring you up to an educated level.

· Check all the transitional areas such as sidewalks, garage floors, and streets. These should all be flush, with no bump, and should have the proper thickness. Without these details, you will see water problems, or unraveling of the asphalt. These symptoms only get worse as time goes on.

· Streaking or pockmarks are a good indicator of a thin surface. This happens when there is not enough material to encapsulate the larger stones while paving. The larger stones will tumble and cause imperfections in the surface, or "mat".

· Seams and joints should be flush with each other, and barely visible (if at all) to an untrained eye. Seams and joints that are severely visible or are not evenly matched will fail prematurely.

· Exposed edges of the perimeter should be properly constructed. This is where most companies sink or swim. You should pay most of your attention here. Stand back and carefully look at the edges from a distant point of view. You should observe several aspects: The edges should be either in a perfectly straight line or consistently "flowing" with the turns. The edges should be properly shaped, beveled, or tamped in a consistent looking 60-degree angle. The edges should be compacted properly without looking "squashed" from the top. Without these characteristics, you will have problems later and it just doesn't look as good as it should.

· If you look at the job after a rainstorm, be sure there is no considerable ponding or puddling of water. If you do see water spots you can quickly deduce if they are too deep by measuring them with a coin placed flat in the water. The water should not be deeper than the coin.

· Last but not least, if the driveway was paved recently look for trash or debris left behind. This will indicate the level of cleanliness the crew is at.

You should really focus on the importance of inspecting past jobs by the company before spending your own money on having your asphalt driveway paved. By printing out this guide you can take it with you to create a checklist to write notes and comparisons on. Once you have done this, talk to the homeowner and ask how their experience was with the firm. If you are diligent about researching your contractors prior to hiring them, you nearly eliminate the chance of getting a bad asphalt driveway. It's your money, be sure it's well spent.

Certainly, ask your contractor about asphalt prices. Since early 2008 prices have gone up and down every month (typically up). Most paving contractors will not absorb a price increase. You and your contractor need to be in agreement with what will happen in the case of rising material costs.

Since we are on the topic of price now, let's explore a few matters. There are a few ways of eliminating contractors before price. Be sure they are completely aware of your expectations. Have they presented you with a solution that gives you the absolute best return on investment? Does their reputation meet what you are looking for? If you have done your homework and still are lucky enough to have several contractors to choose from, price now becomes an important focus. Ask about available discounts. Typically, discounts are usually for cash payment, multiple jobs are done at once (i.e. neighbor also needs a driveway), senior citizen, or repeat work. Also, inquire about getting free or discounted maintenance packages once they have completed your driveway. Ask about including other options such as crack barrier or curbing at a lesser amount. Before asking a contractor to directly drop his price, be aware of several things. If you have found a very good contractor, chances are they are very passionate about their work and may feel a bit insulted if asked to match another company's price. If you ask them to match a price and they feel as though their competition is as good as they are, a price reduction might be made to try to satisfy you. Be very considerate when asking for a direct reduction. These days it's very expensive and stressful to operate a successful paving operation. The last thing you want to do is cause your contractor stress that may influence how your driveway is constructed.

Article Source: http://EzineArticles.com/?expert=Richard_Dinkela_II

Article Source: http://EzineArticles.com/1882883

Repair or Replace? What To Do About Your Aging Asphalt Parking Lot

Nothing lasts forever, and asphalt is no exception. There comes a time with every parking lot where you need to ask whether it’s time to repair it, or replace it altogether.

A properly paved asphalt lot can last 20 – 30 years, but the lifespan and condition of any lot depend on many factors. Let’s take a look at the various kinds of damage and repairs, and when you should replace a lot entirely.

The Types of Asphalt Damage

Cracking
Cracking can take many forms, including shrinkage, widening, edge cracks, slippage, alligator cracks, and reflection. Cracks are caused by many different factors, such as water penetration, oxidation from the sun, freezing, and thawing, and poor initial construction. Even the most minor cracks should be sealed as soon as possible, as small cracks can grow into bigger problems. Water or other debris can settle inside, causing the crack to grow, softening the base, and further threatening the integrity of the pavement. Larger cracks may be a warning sign of deeper issues.

Rutting
Rutting is when the pavement shows depressions, or grooves, from wear and tear caused by wheel loads. Ruts can be dangerous, leading to vehicles hydroplaning (from ponded water) that can result in loss of driver control. They can also be a result of deeper sub-soil or design problems, and lead to further deterioration. Ruts less than ⅓ inch deep can generally be left as is, but deeper ruts should be leveled and resurfaced.

When It’s Time To Repair

Crack Sealing
Crack sealing is exactly what it sounds like – filling small cracks to prevent further damage. Cracks that are straight or less than a quarter-inch wide can easily be repaired with a liquid filler. Before sealcoating or resurfacing, all cracks and existing damage must be repaired, so crack sealing is the first step towards further repair and necessary ongoing maintenance responsibility. A yearly schedule of crack sealing is best to prolong the life of your lot.

Seal Coating
After you’ve filled any cracks, you can apply a layer of sealcoating. Sealant keeps the lot looking new and prevents corrosion from a variety of elements, including water, oxidation, UV rays, and oil and gas spills. The ideal time to seal asphalt pavement is when deterioration is first discovered. A new asphalt lot should not be sealed until it is at least 6 months old, and should be resealed every 2 – 4 years, depending on weather and amount of traffic.

Resurfacing (aka overlaying)
Resurfacing, also known as overlaying, adds a new layer of asphalt, generally 1.5 – 2 inches in depth, on top of the older one. If done right, a new layer of asphalt can add 8 – 15 years to your current lot and costs less than a full replacement. All cracks and damage to the old layer need to be repaired before resurfacing, as un-repaired cracks will undermine the new layer. Resurfacing in cold weather can lead to premature deterioration, so the rule of thumb is to pave when temperatures are 50° F and above. Just because a lot is showing serious wear and tear and cracking, that doesn’t mean it needs to be replaced. Resurfacing is a great option to improve the condition of your lot without spending a lot of money.

Mill and Resurface
Resurfacing sometimes is not an option due to existing drainage patterns. When this is an issue milling and resurfacing may be a viable choice. Milling the surface involves the removal of the top layer of asphalt (usually 1” to 1.5”). Once the asphalt is removed, it is then replaced with a new layer of asphalt. Though this is one of the more expensive repairs, the quality of the final product and the service life can rival that of a new parking lot.

When It’s Time to Replace
Sometimes, a parking lot is beyond the point where even resurfacing will help. The answer to whether you should repair or replace essentially comes down to the condition of the lot’s base. Resurfacing is only as good as the surface it is layered on top of. If your parking lot is failing due to an underlying design, structural, sub-soil, or construction issue, none of the resurfacing options listed above will solve the problem in the long term. Though the parking lot will initially look better, the “repair” will be short-lived.

If a parking lot is approaching 20 years of age, or if 25-35% of the total surface area is in need of removal due to significant damage, it is generally more economical and effective to completely reconstruct the parking lot. With proper maintenance, your new lot can last another 20 – 30 years.

Proper evaluation and recommendations are critical to avoid any financial missteps in getting your parking lot back on-line.

Article Source: https://www.gleassociates.com/repair-or-replace-what-to-do-about-your-aging-asphalt-parking-lot/

Replace or Patch? - Four Areas of Asphalt Maintenance

When looking at asphalt maintenance it can be divided into four areas. The primary cause of asphalt failing is the penetration of water into the asphalt base. Over time, it will become brittle and dry with the aggregate beginning to wear away and cause cracks that will let water penetrate into the base of the pavement. When the water seeps into the crack it causes the base material to move and settle. This leads to the surface cracking in a pattern that is grid-like When the payment has reached this stage there are only two options, which replace the old asphalt or patch repair it.

Patch repair

It deals with areas that are isolated. Using a backhoe and saw-cutting the pavement is removed. They can also use a grinding machine. Once the old asphalt is removed, it is replaced with new asphalt. The removal method determines the amount that is removed. The removal depth should be equal to one point five times the original thickness of the asphalt. You may also have to replace the base-rock to match the adjacent areas to allow for base support that is uniform. The amount of removal should be extended twelve inches past the area that failed.

Asphalt overlay

This asphalt maintenance is affordable and provides a new wearing surface. When dealing with asphalt overlay there is a certain factor you need to be aware of, which include:

• Overlay thickness-it should be a maximum of two point five inches with a minimum of one point five inches
• Smooth transitions-when you are considering where to grind the existing pavement down remember not to grind down the overlay section to match the existing structure. If you do this could weaken the strength of the overlay. They will grind the existing payment down to where they meet flush together to prevent this.

Inlay and pulverize in place

Both of these areas of asphalt maintenance are accomplished using a milling machine. During the process of inlay, it removes a depth of the existing asphalt, which is many times a previous overlay. This will let the contractors put the asphalt back to the pre-inlay elevation. The method of pulverize-in-place will reduce all of the asphalt to particles that are base-rock size.

Seal coating

This is an important part of extending the life of the asphalt and it should not be overlooked. Seal coating is a mixture of mineral fibers, emulsified asphalt, and water along with other admixtures. This will seal the top layer of asphalt to prevent water from penetrating the pavement surface and protecting the top layer from wear from sun exposure and oxidation. It is what gives the asphalt its even black surface.

Article Source: http://EzineArticles.com/expert/Lora_Davis/2146280

Article Source: http://EzineArticles.com/9674163

3 Types of Damage Asphalt Sealing Prevents

Asphalt sealing is an important part of maintaining a driveway or parking lot made of this material. It should be performed every two to three years to protect the pavement from developing damage that could shorten its life span. If you miss this maintenance, you could develop one or more of the issues below.

What Can Happen When You Skip Asphalt Sealing

1. Freeze-Thaw Expansion & Fracturing
The winter can be absolutely brutal on asphalt, particularly due to the freeze-thaw cycle. This occurs when water seeps down into the pavement, freezes, and expands — resulting in cracks. As the water thaws, it will then creep even deeper into the material, repeating this process and leading to numerous fractures. Asphalt sealing prevents this by covering any small cracks in the material and keeping water out year-round.

2. Sun Drying
asphalt sealing cookeville tnWhen the sun’s harmful ultraviolet rays beat down on asphalt, they damage it in a way similar to how they affect your skin. The chemical bonds in the pavement begin to deteriorate, leading to cracks and other damage on the surface. Asphalt sealing prevents this by covering the blacktop in anti-oxidation additives and other aggregates that act as a barrier.

3. Surface Softening
Since asphalt pavement is predominantly used by vehicles, it will most likely experience some auto fluid spills. When oil, gas, and similar liquids fall onto the surface, they will be absorbed by the asphalt and cause it to soften. While these spills can be easily cleaned up in most cases, overtime they can result in cracks or a deterioration of the aggregates comprising the blacktop.

Article Source: https://nearsay.com/c/516510/215844/3-types-of-damage-asphalt-sealing-prevents