Sunday, August 30, 2020
Asphalt Paving Driveway Maintenance Tips
Asphalt paving or Hot Mix Asphalt is typically what one thinks of when installing driveways of new homes. It is by far one of the least expensive methods for paving a surface in new home construction sites. Properly installed asphalt paved driveways have a life expectancy of about thirty or more years.
These asphalt paved driveways consist of rock particles, sand, and asphalt cement, which make it flexible and durable at the same time. New asphalt is by far the most flexible because it still retains many of the lighter hydrocarbon oils that make up its DNA structure. Crushed gravel makes up the foundation on which the asphalt is laid, to promote stability of the asphalt structure. By laying five to eight inches of gravel beneath the asphalt you are ensuring a greater life expectancy for your asphalt driveway. Also by having your asphalt paving company install your asphalt finish at least one foot before the asphalt covers the gravel, you are allowing your asphalt driveway to not crack when visitors drive to the edge of the finished surface. This will give greater flexibility and allow your asphalt driveway to look as nice as it can for as long as possible. The next step is to seal your asphalt driveway after about six to nine months.
The new asphalt driveway must cure out over that time frame. If sealed to quickly, the hydrocarbon oils that give the asphalt paving its flexibility will cause it to be too flexible, thus, allowing greater marks to exist over time. When it is time to seal your asphalt paved driveway, remember to put at least two coats of high-quality seal coat over the entire driveway. This is to be repeated every three to five years for the maximum life expectancy of your asphalt paved driveway. By being patient and following this advice, your asphalt paved driveway will be around for many years to come. Take good care of it and it will definitely add character to your home. Asphalt paving or Hot Mix Asphalt is and will always be the best alternative for those seeking to pave surfaces in a flexible manner.
Article Source: http://EzineArticles.com/expert/Brett_Lane/6873
Article Source: http://EzineArticles.com/36429
Thursday, August 27, 2020
Four Areas of Asphalt Maintenance
When looking at asphalt maintenance it can be divided into four areas. The primary cause of asphalt failing is the penetration of water into the asphalt base. Over time, it will become brittle and dry with the aggregate beginning to wear away and cause cracks that will let water penetrate into the base of the pavement. When the water seeps into the crack it causes the base material to move and settle. This leads to the surface cracking in a pattern that is grid-like When the payment has reached this stage there are only two options, which replace the old asphalt or patch repair it.
Patch repair
It deals with areas that are isolated. Using a backhoe and saw-cutting the pavement is removed. They can also use a grinding machine. Once the old asphalt is removed, it is replaced with new asphalt. The removal method determines the amount that is removed. The removal depth should be equal to one point five times the original thickness of the asphalt. You may also have to replace the base-rock to match the adjacent areas to allow for base support that is uniform. The amount of removal should be extended twelve inches past the area that failed.
Asphalt overlay
This asphalt maintenance is affordable and provides a new wearing surface. When dealing with asphalt overlay there is a certain factor you need to be aware of, which include:
• Overlay thickness-it should be a maximum of two point five inches with a minimum of one point five inches
• Smooth transitions-when you are considering where to grind the existing pavement down remember not to grind down the overlay section to match the existing structure. If you do this could weaken the strength of the overlay. They will grind the existing payment down to where they meet flush together to prevent this.
Inlay and pulverize in place
Both of these areas of asphalt maintenance are accomplished using a milling machine. During the process of inlay, it removes a depth of the existing asphalt, which is many times a previous overlay. This will let the contractors put the asphalt back to the pre-inlay elevation. The method of pulverize-in-place will reduce all of the asphalt to particles that are base-rock size.
Seal coating
This is an important part of extending the life of the asphalt and it should not be overlooked. Seal coating is a mixture of mineral fibers, emulsified asphalt, and water along with other admixtures. This will seal the top layer of asphalt to prevent water from penetrating the pavement surface and protecting the top layer from wear from sun exposure and oxidation. It is what gives the asphalt its even black surface.
Article Source: http://EzineArticles.com/expert/Lora_Davis/2146280
Article Source: http://EzineArticles.com/9674163
Monday, August 24, 2020
Vaca Vet Striping Services: Grading & Excavating
http://vacavetstriping.com
If you’re looking to increase your property value and curb appeal by dressing up your driveway, fixing an irritating drainage problem, enhancing the aesthetics via site grading we got you covered!
If you’re looking to increase your property value and curb appeal by dressing up your driveway, fixing an irritating drainage problem, enhancing the aesthetics via site grading we got you covered!
Vaca Vet Striping has over 30 years experience doing business as ACE Paving Company, with a General Engineering Class A Contractor’s License #389714. We strive to provide quality work and great service at an affordable cost. Vaca Vet Striping service area is Solano, Napa, Yolo, and Sacramento counties.
Friday, August 21, 2020
Information About Commercial Asphalt Driveways
There are several reasons why many commercial property owners are paving their driveways with asphalt rather than concrete. Asphalt pavement comes with many benefits and advantages; especially when it comes to maintenance and repair. Asphalt is much more economical than concrete for this reason and more. On top of its flexibility and easy maintenance aspects, it typically costs less than concrete materials at most hardware and construction stores.
Although concrete paving can last up to 15 or 20 years without needing repairs, asphalt is still a trendier choice for most residential and commercial properties for a number of reasons. Continue reading to catch up on some important information about asphalt paving and why it is more popular than concrete these days.
Asphalt Pavement for Driveways
As mentioned before, concrete can last up to fifteen or twenty years without needing repairs; while asphalt paving may eventually require some upkeep after about five to seven years. There are several reasons why asphalt pavement can weaken or deteriorate. For example, elemental conditions, over-exposure, negligence, cars, and the surrounding natural environment call all have an effect on asphalt pavements. The following influences are common contributors to asphalt damage, potholes, and wear and tear:
- Heavy Trucks, Cars, and Loads
- Substantial Water Saturation
- Constant Exposure to Moisture
- Harsh Storms
- Overgrown Tree Roots
- Poor Foundation
- Tectonic Plates
- And More
It is recommended to place sprinklers and watering hoses far from newly paved asphalt driveways. Also, large or old trees should be removed to protect new asphalt from tree root damage. Even if the tree seems like it will not be a threat, it is safer to remove it before experiencing asphalt damage from underground root systems. As soon as you see a pothole or crack appear, it is suggested to take immediate action to prevent further wear and tear. The sooner an asphalt issue is acknowledged and fixed, the less expensive the repair will cost. You can purchase asphalt fillers and pothole repair kits at local hardware and home good stores; however, it is highly recommended to seek out professional assistance from a licensed and experienced asphalt paving engineer. They can give you the best advice on asphalt maintenance and repair. If you do decide to repair asphalt driveway damages on your own, you can still ask a retail clerk at the store for extra instructions or advice. They too should know plenty of information about the product they are selling.
Article Source: http://EzineArticles.com/expert/Sarahbeth_Kluzinski/1326228
Article Source: http://EzineArticles.com/9670899
Tuesday, August 18, 2020
All of the Benefits of Sealcoating Asphalt Pavement
Here's why that driveway sealer project shouldn't be at the bottom of your to-do list.
For new homeowners who aren't familiar, sealcoat (or pavement sealer) is a liquid coating mixture that's usually applied to asphalt-based pavement. When moving into your new house, fixing the driveway might not be high on your list of priorities. In fact, you might even be asking yourself: Is sealcoating really necessary for my home?
If you’ve made an investment by purchasing a house, you want to take great care of it, right? You spend hours picking the perfect colors to match your sheets, and every Sunday you bring out the vacuum to suck dirt and debris. You might even spend money trimming your trees and bushes to keep them looking lovely.
When you think about it, your driveway takes up much of your front yard. A cracked, dirty, and faded driveway just doesn’t match with clean, polished cars. Here are some reasons why you should invest in a sealcoat for your driveway.
1. Maintain its Appearance
Your driveway takes up space. It’s where cars are parked and where children play during the sweltering summer months. If it isn’t well-maintained, it can have a detrimental effect on your house’s appearance. Asphalt driveways are prone to cracking, fading, and other signs of distress. It doesn’t look good to anyone! Cracks in the asphalt can even lead to accidents.
A sealcoat sits on top of a driveway and acts as a barrier for it. Its deep black color looks regal and strong. The coat prevents water, car fluids, water, the sun, salt, and other chemicals from warping the color or eating away at the driveway. And a sealcoat will prevent weeds from growing in the asphalt. That means no more getting down on hands and knees just to clean those irritating weeds!
New sealcoat, when applied, looks bold and dark. It improves the appearance of both new and old asphalt, adding a pop of vibrancy to your house that you may not have expected.
2. Prevent Cracks
Sometimes, your new home comes with cracks in the pavement. You might be inclined to think, “Well, the previous owner seemed just fine with these cracks. The driveway looks good enough.” Don’t settle for mediocrity—you deserve the best!
Water that seeps into the base material can cause small cracks to widen. Sealcoating your driveway properly will prevent that. Any minor cracks and rough patches can be smoothed over, and if there's any dirt on your driveway, the rain can easily wash it away. That's because sealcoat is a non-porous, smooth surface.
3. Protect the Asphalt
The sun can burn our skin, but did you know it can also harm your driveway? Surface voids on asphalt can absorb oxygen and UV rays. The radiation from the sun can warp the asphalt and cause the color to fade quickly. On top of that, pockets of surface void allow oil or gas to penetrate.
Chemical spills can also worsen your driveway's condition. With a thick layer of sealcoat, you'll be able to prevent (or at the very least, minimize) the harmful effects of spills and the sun. By lowering the rate of water absorption (the water will run right off), sealcoating minimizes the risks of damage due to water, snow, and freezing. There are many things that can destroy your driveway: gas, diesel fuel, salt, chemicals, oil, and ice. It's better to prevent these from attacking your driveway so that you won't have to risk costly damage control.
4. It's Strong
Sealcoat helps attract heat from sunlight and becomes more pliable when hot. Instead of the asphalt cracking at high temperatures, the sealcoat will mold to shape. If you have guests over, the asphalt won’t waver under the combined weight of the cars. That’s because the sealcoat will be there to protect it.
5. It Saves Money
Sealcoating can be done as a weekend DIY project, or you can hire someone to do it for you. A DIY sealcoat project should cost about $50 to $200. It all depends on the size of your driveway. On the other hand, hiring a professional is probably safer. It would cost about $200 to $500. If you choose to hire a company or a person, you can be assured that they'll be more familiar with good products. Different products work better in certain areas (because of the temperature and climate), and a professional will know which sealants are best avoided.
Whether you choose to do it yourself or hire someone else, sealcoating your driveway is far cheaper than spending hundreds of dollars trying to repair or even replace your driveway's asphalt!
If you allow moisture to seep into the driveway, you might not notice at first. But after weeks, the quickened deterioration will begin to show as your asphalt becomes more and more distressed. It’s much easier to prevent the issues instead of scrambling to find someone who can quickly fix the asphalt! Just make sure that you wait 90 days after setting a new asphalt driveway to apply the sealcoat.
Article Source: https://housetipster.com/housetips/1151/5-benefits-of-sealcoating-asphalt-pavement
Saturday, August 15, 2020
8 Benefits of Restriping Your Parking Lot
Parking lot lines are an essential part of a structured, organized parking lot. Over time these lines fade, which is why you have to restripe them every so often. Fading is caused by the amount of traffic your parking lot gets, environmental conditions such as sun exposure and weather, and the quality of the paint. For this reason, paving experts suggest that you should restripe your lines every 18 – 24 months.
Are your parking lot lines fading? Are you tempted to hold off on restriping until next year? These 8 benefits of restriping your parking lot may change your mind.
8 Benefits of Restriping Your Parking Lot
1. Appearance
One of the benefits of restriping is purely aesthetic – a restriped parking lot with vibrantly colored lines will improve the curb appeal of your business. It’s an easy way to give your business a facelift that everyone passing by will notice.
2. Organization
A well-striped parking lot is a well-organized parking lot. Residents or customers know where the driving lanes are and where the authorized parking spots are. Parking lot stripes provide guidance just like the stripes on the road.
3. Customer Satisfaction
Your parking lot is part of the service that you offer to customers, just like the features inside your building. By restriping your parking lot you are telling customers that their experience at your establishment matters and you want to provide them with the best customer service.
4. ADA Compliance
The Americans with Disabilities Act has certain guidelines for parking lot stripes. Depending on the number of parking spaces your lot accommodates, it must include a certain number of accessible parking spaces for cars and wider spaces for vans. Restriping can help you clearly designate these spots so you are complying with the law and providing the proper accommodations for your handicapped residents or customers.
5. Maximize Parking Space
Are you getting the most out of your parking lot space? If you’re not currently satisfied with your parking lot, a restriping company can help evaluate the space and suggest changes.
6. An Economical Update
All businesses owners look for ways to make their business more attractive to customers. Restriping is an inexpensive way to get an instant improvement.
7. Reducing Liability
Faded lines can be hard for some customers to see, which could result in accidents where you are at fault. These lines communicate crucial information such as where pedestrians can walk, who has the right of way, what areas to avoid, and where vehicles must stop. Faded lines can cause confusion and accidents. Visible, well-defined lines will lower your risk of these liabilities.
8. Compliance with Fire Codes
Fire codes require a designated fire lane in case of emergency, and this lane should be marked with the appropriate signs, curb markings, or pavement markings. Restriping can also ensure your compliance with fire codes.
As you can see, there are many benefits of restriping your parking lot, from aesthetics and customer service to reducing liabilities and complying with laws. If your parking lot lines are fading, it’s time to add restriping to your parking lot maintenance plan.
Article Source: https://www.integritypavingtexas.com/blog/8-benefits-of-restriping-your-parking-lot/
Wednesday, August 12, 2020
Why Asphalt Paving is the Top Choice For Most Property Owners
Whenever construction-related topics are discussed, the use of asphalt VS concrete always creates a bit of controversy. This is especially true when the discussion focuses on paving. Even the word paving these days is used to describe mostly asphalt. But the truth is pavement is any material used to created roads or driveways. The most common modern paving methods, however, are asphalt and concrete.
Both asphalt and concrete have a long history in the building industry because of the variety of ways the materials can be used. However, in regard to paving parking lots and driveways, the biggest argument has mainly been about initial cost.
Now comes the inevitable question, "Which is the better material for parking lot and driveway surfaces?" The answer may surprise nearly everyone. And if you are a property or business owner, the results documented by industry experts as well as scientific studies are quite revealing.
According to Wikipedia, Discovery.com and Industry Sources, here are the latest findings. We'll start with Concrete Paving:
The Complete Details About Concrete Paving:
• - Concrete is more prone to cracking and buckling because it's rigid and dense design. Tree Roots, Ground Movements, Freeze Thaw Cycles, and soil movement are huge contributors to concretes deterioration.
• - According to the Ohio Highway Commission, concrete costs of $70 to $100 per cubic yard were more than double the costs of asphalt paving. All Ohio highway paving is now done with asphalt.
• - Concrete paving of parking lot and driveway surfaces requires more time and initial cost than asphalt paving. This holds especially true the larger a project gets.
• - Repairs to concrete paving surfaces are more costly to repair than asphalt. They also don't blend as well as asphalt paving does. Especially after asphalt gets freshly seal coated.
• + Concrete paving last far longer than asphalt paving surfaces.
• + Concrete paving maintenance cost over time, is far less expensive than asphalt paving.
• + Concrete paving requires far less on-going maintenance to keep its strength.
The Complete Details About Asphalt Paving:
• - Asphalt requires continual maintenance including seal coating, striping, crack filling, and many other forgotten costs when deciding what type of pavement to install.
• + Asphalt Paving offers more flexibility giving a slight advantage over concrete in terms of handling stress and cracking.
• -+ Asphalt is the easiest to use and most economical pothole repair product available. It can be applied as a cold patch, hot patch, and become a permanent solution for repairing potholes in a shorter amount of time than concrete and other more costly hybrid mixtures. Keep in mind that potholes are far less likely in concrete.
• + In addition to pothole repair, asphalt is used to repair parking lots, driveways, and roadways on a larger scale. The preparation for paving with asphalt is relatively easy, depending on the condition of the surface being covered. Asphalt paving can be done directly over the present pavement in many cases.
• + Asphalt is very strong, durable and weather resistant in addition to being resistant to damaging effects from chemicals
• - Only when the maintenance schedules are kept up.
• + Asphalt sets faster than concrete giving it a strong advantage in both cost and convenience for parking lot and driveway paving.
In summary,
Asphalt:
An environmentally friendly and recyclable paving product that provides many benefits for driveway, road, and parking area applications. With its upfront cost savings, it is by far the more popular choice for parking situations and driveway paving construction. However, those upfront savings are quickly lost within the first 5 years of installation through ongoing and costly asphalt construction projects.
Concrete:
Also highly green in its recyclable qualities. Concrete paving is a long lasting, low maintenance cost product which looks great over time. Although typically more difficult and slightly costlier to repair, when that time comes. Over time the cost to maintain a concrete pavement surface is much lower. Over the life span of 20-30 years, there will be even a larger saving on concrete constructed projects VS its asphalt counterpart.
Article Source: http://EzineArticles.com/expert/Scott_Flores/647793
Article Source: http://EzineArticles.com/4317975
Sunday, August 9, 2020
8 Benefits of Paving Your Driveway and Parking Lot with Asphalt: Why Consider It For Your Home or Business
If you are a new homeowner, property manager or business owner, or just aren’t satisfied with you’re the current status of your driveway or parking lot, consider the many benefits:
1. Asphalt paved driveways and parking lots increase the value of your property.
2. Customers really appreciate a well-paved parking lot, for its ease.
3. A well-paved driveway adds to the curb appeal of your home or business and is aesthetically pleasing.
4. Asphalt provides a smoother and safer playing surface for children.
5. Asphalt, as opposed to dirt or pebble driveways, is cleaner and eliminates tracking mud into your home or business.
6. The need to continually fill in sunken areas and/or tire tracks is eliminated.
7. Snow and ice melt quickly on dark colored asphalt.
8. More economical as it typically costs less than other options such as concrete for driveways and parking lots.
Article Source: https://sgasphalt.com/8-benefits-paving-driveway-parking-lot-asphalt-consider-home-business
Thursday, August 6, 2020
Enjoy a Safe Driveway or Parking Lot by Hiring Expert Paving Contractors!
A safe parking lot or driveway is an essential first step to
creating a welcoming atmosphere at any home or business. Prevent person
injuries and property damage by hiring a professional paving contractor
to perform effective, long-lasting pavement repairs, resurfacing, and
more.
Potholed, crumbled, or cracked parking lots and driveways don't just give off a poor impression. They can deter customers from your business, create neighborhood eyesores, pose physical threats to people and vehicles, and even result in damage to your buildings due to poor drainage. If you have damaged pavement on your property or need a new parking lot or driveway, call your local paving contractors today. These professionals have the experience and know-how to provide you with attractive, safe craftsmanship that will serve you well for years to come.
How do paving contractors promote safety?
Correctable and preventable problems such as potholes, cracks, and dips can cause broken ankles, scraped knees, or worse. Your paving contractor is available to provide a variety of parking lot and driveway paving and repairs, such as filling in potholes, sealing cracks, installing block edges to prevent crumbling, and more. Replacement driveway or parking lot paving is also an option if your current pavement is irreparably damaged. These professionals will only use quality materials and tools to ensure a sleek look and continued performance season after season.
Your paving professional will begin by ensuring that the construction area is even and stable. Your terrain will be then be examined in order to determine the proper grade for your pavement. This encourages water to drain away from your property, which helps prevent water damage and puddles. The base stone will then be laid, bound with asphalt binder, and then sealed with a smooth top coat.
After proper pavement installation, your paving contractor can then provide additional safety features and services, including:
Installing and servicing reliable driveways and parking lots comes from years of experience and expert knowledge. Using a professional paving company is necessary if you want to enjoy quality work that can stand up to time, traffic, and the elements. If you want to help prevent vehicle accidents, remove safety hazards, or just are sick of having grass grow in the cracks of your driveway, don't settle for amateur work. Call your local paving professionals today.
Potholed, crumbled, or cracked parking lots and driveways don't just give off a poor impression. They can deter customers from your business, create neighborhood eyesores, pose physical threats to people and vehicles, and even result in damage to your buildings due to poor drainage. If you have damaged pavement on your property or need a new parking lot or driveway, call your local paving contractors today. These professionals have the experience and know-how to provide you with attractive, safe craftsmanship that will serve you well for years to come.
How do paving contractors promote safety?
Correctable and preventable problems such as potholes, cracks, and dips can cause broken ankles, scraped knees, or worse. Your paving contractor is available to provide a variety of parking lot and driveway paving and repairs, such as filling in potholes, sealing cracks, installing block edges to prevent crumbling, and more. Replacement driveway or parking lot paving is also an option if your current pavement is irreparably damaged. These professionals will only use quality materials and tools to ensure a sleek look and continued performance season after season.
Your paving professional will begin by ensuring that the construction area is even and stable. Your terrain will be then be examined in order to determine the proper grade for your pavement. This encourages water to drain away from your property, which helps prevent water damage and puddles. The base stone will then be laid, bound with asphalt binder, and then sealed with a smooth top coat.
After proper pavement installation, your paving contractor can then provide additional safety features and services, including:
- Sign installation and pavement painting - Arrows, signs, parking lines, and other accessories and details are essential for an orderly parking lot. These features help prevent accidents, distinguish handicap reserved spaces, and more!
- Speed bumps - Discourage speeding on your property with strong, effective speed bumps.
- Prevent vehicular damage - Potholes and other deterioration are often the culprit behind popped tires and damaged suspensions. Prompt driveway and parking lot repairs can protect cars as well as people.
Installing and servicing reliable driveways and parking lots comes from years of experience and expert knowledge. Using a professional paving company is necessary if you want to enjoy quality work that can stand up to time, traffic, and the elements. If you want to help prevent vehicle accidents, remove safety hazards, or just are sick of having grass grow in the cracks of your driveway, don't settle for amateur work. Call your local paving professionals today.
Article Source: http://EzineArticles.com/5279582
Monday, August 3, 2020
Driveway Sealers Provide For A Long Lasting Driveway
For the proper maintenance of an asphalt driveway, you should include the application of an asphalt sealer. There are various kinds of sealers available on the market today and it can either be applied professionally or completed by the homeowner. Regular maintenance by adding a sealant to the asphalt driveway is done every three to four years to keep the roadway looking great.
By sealing the asphalt driveway with a protective covering you go a long way toward preventing the material from deteriorating. The ultraviolet rays coming from the sun, leaked oils and grease, and road salts are all elements that can deteriorate the driveway. When all of these elements are combined, the binder material of the asphalt will surely deteriorate and its aggregate layer is going to be exposed to the natural elements. There are several types of driveway sealers but getting the right one for your situation is actually an easy task.
Sealers are of two basic varieties, the coal tar, and the asphalt. The products are contained in an emulsion material which is generally oil-based. Sealers can also contain polymers, sand, latex, clay and other additives that are necessary to fill in the cracks and provide further protection against the harmful sun rays, oils, and salt that come in contact in the surface of the driveway. The applications based on coal tar are actually produced from a by-product of the process of coal production and they are known to be the tougher application. Products made of coal tar will give off more toxic odors and they are not environmentally friendly like the products based on asphalt. The emulsion will bond with the asphalt driveway so that it gives protection. A majority of stains like oil and grease can also be removed easily if the driveway is sealed. A lot of asphalt-based sealing products do have some coal tar but generally, they are friendlier to the environment and slightly much easier to apply.
These do it yourself products can be purchased in all hardware stores, home improvement shops and a lot of retail stores. These products can be easily applied by using a roller and squeegee. This can also be done in just one day. The available asphalt sealers for professional pavement sealing business are generally of higher quality and of longer life. A homeowner has to make up his mind on when and how the driveway should be protected. This is something that should be done regularly.
By sealing the asphalt driveway with a protective covering you go a long way toward preventing the material from deteriorating. The ultraviolet rays coming from the sun, leaked oils and grease, and road salts are all elements that can deteriorate the driveway. When all of these elements are combined, the binder material of the asphalt will surely deteriorate and its aggregate layer is going to be exposed to the natural elements. There are several types of driveway sealers but getting the right one for your situation is actually an easy task.
Sealers are of two basic varieties, the coal tar, and the asphalt. The products are contained in an emulsion material which is generally oil-based. Sealers can also contain polymers, sand, latex, clay and other additives that are necessary to fill in the cracks and provide further protection against the harmful sun rays, oils, and salt that come in contact in the surface of the driveway. The applications based on coal tar are actually produced from a by-product of the process of coal production and they are known to be the tougher application. Products made of coal tar will give off more toxic odors and they are not environmentally friendly like the products based on asphalt. The emulsion will bond with the asphalt driveway so that it gives protection. A majority of stains like oil and grease can also be removed easily if the driveway is sealed. A lot of asphalt-based sealing products do have some coal tar but generally, they are friendlier to the environment and slightly much easier to apply.
These do it yourself products can be purchased in all hardware stores, home improvement shops and a lot of retail stores. These products can be easily applied by using a roller and squeegee. This can also be done in just one day. The available asphalt sealers for professional pavement sealing business are generally of higher quality and of longer life. A homeowner has to make up his mind on when and how the driveway should be protected. This is something that should be done regularly.
Article Source: http://EzineArticles.com/5787578
Subscribe to:
Posts (Atom)