5 Reasons to Have Your Parking Lot Seal-Coated

Parking lots are necessary for commercial properties because they provide people with convenient places to park their cars. However, they naturally experience wear and tear over the years from all the traffic—they stain and crack at a much faster rate than concrete does. Fortunately, there’s an easy solution for the inevitable damage: sealcoating. Sealcoating involves applying a thin liquid layer over a paved surface to create a tough, uniform buffer and, ultimately, to renew asphalt driveways and parking lots. Below, we identify five reasons to have your asphalt parking lot seal-coated.

It’s Cost-Effective
One of the biggest benefits of sealcoating is that you’ll pay less for parking lot repairs over time. While sealcoating doesn’t prevent small cracks, it keeps them from developing into larger ones and causing costly asphalt failure—essentially, you avoid expensive services down the road. Fully repaving a parking lot isn’t just troublesome—it will also cost you more than sealcoating. Although pricing varies based on the preparation, the method used, the amount of time the job takes, and the size of your parking lot, the total cost is doable for any property owner. Therefore, although you must pay for it upfront, sealcoating saves you money because you won’t have to repair your parking lot as often as you would have to without a sealer. Ideally, you should seal your parking lot every two to three years; this preventative service can ultimately save you thousands of dollars.

It Enhances Your Parking Lot’s Appearance
Business owners and property managers often overlook the maintenance of their asphalt surfaces. However, when people visit a building, one of the first things they notice is the parking lot. After all, parking lots make up about 40 percent of a typical city’s paved surface area. To increase your parking lot’s value and to encourage positive first impressions, you want to keep your lot looking its best. Asphalt surfaces tend to crack and lose their rich, jet-black color over time, but sealcoating will make your existing asphalt appear darker and any paint appear brighter. In other words, your parking lot will look brand-new again, and in turn, it will appear more professional and inviting to the community.

It Extends Pavement Life
Asphalt is durable, but as with anything, it can’t last forever. The weather can wreak havoc on pavement, causing it to deteriorate prematurely. Even the sun’s ultraviolet rays can damage your parking lot because they dry out the asphalt. However, that doesn’t mean you should let it continue to break down. Regularly scheduled sealcoating maintenance can drastically extend your pavement’s life—we’re talking up to 30 years of defense. This is because a sealer acts as a powerful protective layer against damage, helping the pavement maintain its strength and flexibility without giving under pressure.

Sealcoating also minimizes water penetration because it acts as a waterproofing agent. Water may seem harmless, but it can contribute to large issues in the future. Water fills in cracks and expands in freezing temperatures, causing even more cracks in the pavement. Additionally, sealcoating slows oxidation caused by harsh weather conditions. Your parking lot needs its asphalt binder and surface oils to stay intact—if it loses these materials due to oxidization, it can become brittle. For maximum usability and protection against the elements, consider investing in a sealer for your parking lot.

It Improves Safety
Drivers expect parking lots to be safe. Thankfully, because a sealer makes the asphalt’s markings pop, it will make your parking lot safer and more functional. Sealcoating also adds friction to asphalt pavements, so cars are less likely to slip in icy or rainy conditions. A sealer also prevents debris from putting your safety at risk. Sealcoating smooths your parking lot’s surface, making it easier to clean—all you must do is sweep it in the summer or shovel it in the winter. Throughout the seasons, rain will easily wash away any dirt and snow won’t freeze on top of the sealcoat. Additionally, freeze-thaw cycles don’t affect sealed surfaces, meaning that sealcoating prevents cracks, potholes, and other dangerous imperfections that can cause accidents and car damage.

It Protects Against Hazardous Chemicals
Finally, sealcoating acts as a shield against chemical spills and stains. Because your parking lot is porous, road salt and automotive fluids such as antifreeze, gas, and oil can dissolve into the asphalt and soften it over time. These substances can cause more damage than you might think, so thoroughly protect your investment from chemicals and other harmful contaminants by sealcoating it. Once you seal your parking lot, these types of pollutants won’t be able to penetrate the pavement and damage it.

As you can see, sealcoating offers a host of benefits. Before you seal your parking lot, you’ll first need to prepare it. Make note of any defects in your parking lot that you must repair prior to sealcoating, such as cracks, potholes, and oil spots. Once you have fixed these blemishes, your lot is ready for sealer—just keep in mind that your parking lot must be completely dry before you seal it.

Article Source: https://www.paragon-protection.com/5-reasons-to-have-your-parking-lot-seal-coated/

Why Asphalt Crack Repair Can Benefit Property Managers

Whether you manage a property for an individual or a corporation, your performance will be judged on many factors. Many of these factors depend on the type of property you manage, but one element transcends all property types: Are you helping the owner maximize profits by protecting the property’s assets? Although these assets vary, virtually all commercial properties have a parking lot that represents a significant investment. If you are not ensuring timely asphalt crack repairs for your asphalt parking lot, you could be jeopardizing that investment.

Why Asphalt Crack Repair Can Benefit Property Managers

How Does Crack Repair Help Protect an Investment in Asphalt Pavement?
Contractors build an asphalt pavement by constructing and compacting a stable foundation to support the weight of the pavement as well as the traffic that the roadway will bear. The foundation is a critical part of the pavement’s longevity. If the foundation becomes unstable, voids can develop that allow the pavement to subside. These voids can lead to the formation of potholes, large cracks, and alligator cracking. The leading cause of an unstable foundation is damage from water that leaked through cracks in the pavement. In most instances, an economical asphalt crack repair can prevent water penetration, averting costlier repairs and the premature demise of the pavement.

How Do Contractors Repair Cracks in Asphalt Pavement?
There are two basic methods that asphalt contractors can use to repair cracks. The method chosen depends on the nature of the crack. Both methods require the contractor to clean out the crack before introducing the repair material.

• Asphalt crack filling is the introduction of a fill material into the crack. Asphalt crack filler is somewhat rigid, so it is typically used for inactive cracks that will not continue to grow. Most block cracks and edge cracks are inactive, making them good candidates for asphalt crack filling. Some longitudinal cracks are also inactive, but most contractors prefer to use asphalt crack sealing for all longitudinal cracks.
• Asphalt crack sealing is often used for cracks that are less than an inch wide. As the name implies, this method seals the crack, preventing water and dirt from entering. Crack sealants are preferable for active cracks. Active cracks will continue to expand, but sealants are flexible enough to move with the pavement without breaking their bond. As a general rule, all transverse cracks will require sealing rather than filling. Some longitudinal, cold-joint and reflective cracks will also require the use of a sealant rather than an asphalt crack filler.

When Should Cracks Be Repaired?
Once a crack develops, you want to repair it as soon as possible. The problem is that you cannot restore a crack if you do not know it exists. A thorough visual inspection of your pavement every few months can help you identify issues, but you might want to consider asking your contractor whether he offers an asphalt maintenance program. Choose a program that provides a professional inspection at least once a year; it would be better to have an inspection in the spring and another one in the fall. The following tips can also help you protect your asphalt pavement.

• Hire a professional to apply sealant periodically. Sealcoating offers excellent protection against the sun and automotive fluids, but it is not a permanent treatment.
• Keep drains clean so that they can carry runoff safely away from your pavement. A clogged drain can force water underneath the surrounding pavement, leading to cracks and foundation damage.
• Keep your pavement clean. Remove trash, dead leaves, grass clippings, and other debris. Clean oil and other automotive fluids that may have leaked onto the pavement; they can soften your asphalt pavement, leaving it more vulnerable to damage.

Article Source: https://www.alphapavingtexas.com/faq/why-asphalt-crack-repair-can-benefit-property-managers/

What Does Your Parking Lot Say About Your Business?

When was the last time you looked at your parking lot? Really looked at it - from a customer, visitor, or residents' perspective?

Ask yourself these few questions: Is the entrance to your facility making a good first impression? Is it causing long-term tenants to not renew their lease or customers to drive on by? Does it cause a safety hazard to cars and foot traffic?

For many businesses, the parking lot often is not on many facility managers or property owners' radar - until it becomes a problem. If your customers or tenants start complaining, or worse, not coming back to your facility because of the poor repair of your parking lot, you have a big problem.

So, how do you keep up with the maintenance and asphalt repairs for your parking area to keep the visitors to your business happy? First, find a paving contractor that offers a preventative maintenance plan. Second, be sure your asphalt repairs, sealcoating and other parking lot maintenance are performed by a licensed contractor. And last, but certainly not least, be sure your paving company and its employees are ones that you can trust to offer fair pricing and effective solutions.

Determining Your Needs

Here's a quick list of some of the things you and your paving contractor should be on the lookout for in your parking area:

Pot Holes - Does driving through your parking lot feel like you're on a bumpy dirt road? Pot holes cause tremendous wear and tear on vehicles and are a safety hazard to pedestrians. They are also a sign that water is seeping beneath the asphalt pavement through cracks that have been caused by wear and tear of traffic. Pothole repairs can be easily fixed by simply cleaning out the loose debris and filling them with an asphalt patch. However, crack filling and proper sealcoating can help prevent the need for pothole repairs, or worse yet -- the need for a complete asphalt pavement replacement.

Drainage Issues - Does water sit on your parking lot after a rainstorm? Do you often have to strategically jump across huge puddles just to reach the sidewalk or get in and out of your car? Your paving contractor can evaluate any drainage issues and correct these drainage problems. There are many reasons for drainage issues. Sometimes vehicle traffic that is heavier than the pavement was designed can cause pavement depressions and in turn, standing water. Your paving contractor can make this type of repair by correcting the grade through localized leveling. For other drainage problems, he'll offer other solutions to correct the drainage issues.

Faded Traffic Markings - Are your parking lot lines visible? Can pedestrians and motorists clearly see crosswalks and other traffic markings like stop lines? Line striping designs and pavement markings ensure safe and efficient traffic flow. Proper layout is also required to keep parking lots in compliance with Americans with Disabilities Act (ADA) regulations. To best maximize the number of parking spaces, your paving contractor can design and install an acceptable traffic flow and line striping layout to meet your business needs and be in compliance.

Article Source: http://EzineArticles.com/?expert=M_McHale

Article Source: http://EzineArticles.com/7902235

3 Types of Damage Asphalt Sealing Prevents

Asphalt sealing is an important part of maintaining a driveway or parking lot made of this material. It should be performed every two to three years to protect the pavement from developing damage that could shorten its life span. If you miss this maintenance, you could develop one or more of the issues below.

What Can Happen When You Skip Asphalt Sealing

1. Freeze-Thaw Expansion & Fracturing
The winter can be absolutely brutal on asphalt, particularly due to the freeze-thaw cycle. This occurs when water seeps down into the pavement, freezes, and expands — resulting in cracks. As the water thaws, it will then creep even deeper into the material, repeating this process and leading to numerous fractures. Asphalt sealing prevents this by covering any small cracks in the material and keeping water out year-round.

2. Sun Drying
asphalt sealing cookeville tnWhen the sun’s harmful ultraviolet rays beat down on asphalt, they damage it in a way similar to how they affect your skin. The chemical bonds in the pavement begin to deteriorate, leading to cracks and other damage on the surface. Asphalt sealing prevents this by covering the blacktop in anti-oxidation additives and other aggregates that act as a barrier.

3. Surface Softening
Since asphalt pavement is predominantly used by vehicles, it will most likely experience some auto fluid spills. When oil, gas, and similar liquids fall onto the surface, they will be absorbed by the asphalt and cause it to soften. While these spills can be easily cleaned up in most cases, overtime they can result in cracks or a deterioration of the aggregates comprising the blacktop.

Article Source: https://nearsay.com/c/516510/215844/3-types-of-damage-asphalt-sealing-prevents

Why Fix Asphalt and Concrete Potholes on Your Property?

Every property owner should know that any unfixed concrete or asphalt pothole is a liability on their property. Not only is it dangerous to you as the house resident, but also to the pedestrians who may be walking along your pavements. In the event that they tripped and got hurt, they could sue you for any damages incurred. It is therefore important that you correct any signs of pothole development as soon as you notice them.

Though asphalt and concrete are durable construction materials, with time they do get damaged by ultraviolet rays and storm water. To prevent further damage on your parking area, it’s good to consult a contractor to seal coat it for you. This also prolongs its life span. If you need to have your potholes repaired, always engage a professional in that line for best results.

• As a property owner, you need to know that it’s your responsibility to ensure your house or ground is safe for you or other people who may use your driveways. Uneven asphalt paving or potholes, if left unrepaired, could bring about these outcomes:
• Tripping hazard to you as the resident and to other pedestrians using the pavement or the driveway.
• As the owner of the property, if a pedestrian is injured and you get sued, you face the possibility of losing your money to settle any forthcoming legal obligations.
• If the damage is left unrepaired for too long, it will only add on to your repair cost.

Fast response to damaged asphalt driveways or concrete potholes restores safety and ensures the cracks do not get any bigger. Here are some considerations you should make during the repairing process:

1. Always work with a professional
You can only be guaranteed of a quality job and good results if it is done by a professional contractor with previous experience of similar repairs. Always ask them to show you where they previously worked and if you are impressed, then you can go ahead and hire them. You can also talk to their previous clients on how their repairs were done.

2. Important issues to discuss with your contractor
You and your contractor should agree on the accurate measurement of the area that requires repair. Ensure every part that has signs of damage is covered so that you solve the issue once and for all. The contractor should submit to you a written proposal detailing the scope of work that will be done. You should also agree on an estimate cost and the amount of time it will take to finish the work.

3. Repair hours
Convenience is very important when you are doing repairs. If it is an industrial place, the repairs need not interfere with the running of businesses, such that it can be done overnight when operations are closed. If it is a residential place, notify them about when the repairs will be done.

4. Evaluate the construction process
If the place has tenants who have cars and will require using the parking area that is being repaired, it may call for your contractor to carry out the repairs in sections. This will leave some parking allowance for use and thus further ease your construction process.

5. During the construction
When the construction process kicks off, your contractor needs to mark around the repair area using construction tape. This step ensures no traffic or pedestrians walk into the repair area.

6. After the construction
When all the repairs are complete, lot stripping your driveways will bring out a fresh and new look to it.

Article Source: http://www.asphaltadvisor.com/2015/12/why-fix-asphalt-and-concrete-potholes.html

How to Protect Your Driveway

Driveway sealing is an easy and cost-effective way to protect and prolong the life of your driveway. Asphalt surfaces are particularly susceptible to wear and tear, both from weather and from automobile traffic, and the grade of asphalt commonly used on driveways is even more so. Driveway sealing at regular intervals gives your driveway the added protection it needs to last longer and resist deterioration.

Needs Regular Upkeep
If you’re not sure on this point, consider the constant upkeep the asphalt roads in your community need in order to stay in good shape. Add to that the fact that the asphalt used on roads is generally a higher grade and made to withstand a higher level of abuse than the asphalt typically used in driveway applications, and you can see why it’s important to keep up on regular maintenance, including asphalt sealing, in order to fend off major projects such as repaving a crumbling asphalt surface.

The Benefits
Sealing your driveway has many benefits when it comes to preserving your concrete driveway. First and foremost, a properly applied driveway sealer repels water, perhaps the single most harmful agent when it comes to deteriorating asphalt surfaces. Concrete has a natural tendency to crack if water is allowed to permeate it, and this tendency is only increased by the weight of cars regularly driving over it. Once those cracks appear, water further damages it, especially in cold climates where it expands and contracts with freezing temperatures.

Other enemies of your driveway include sunlight and oxygen, both of which hasten corrosion. By regularly applying a quality driveway sealer to your concrete you can prevent water, sunlight, and air from permeating your asphalt and prevent these problems. As an added benefit, driveway sealing also repels oil spills and leaks and makes it much easier for you to sweep and clean your driveway surface.

When to Apply
As a general rule, you should seal your driveway every 1 to 3 years. More specifically, if you can see the color of the individual stones that make up your asphalt surface, you know it’s time to seal it up. A few rules apply before you seal, however. For starters, never seal a new asphalt driveway. Asphalt needs a minimum of six months for the oils in it to evaporate. The less oil, the harder the driveway, which is the goal. If you apply driveway sealer before your asphalt has time to cure, it won’t achieve the necessary hardness and all your work will be for naught. Other things to consider are the outside temperature, which must be fifty degrees or higher for the sealer to adhere properly, and the weather. Ideally, you want your sealer to be on your driveway for at least 48 hours before any rain comes down on it.

Talk to a Professional
Driveway sealing is an important aspect of asphalt driveway maintenance, however, it’s not the only thing you need to keep up on. If your driveway has pre-existing cracks, potholes or other signs of wear, it’s vital that you fix those problems before you apply a sealant. That being the case, your best bet is to contact a professional that won’t only apply your sealant, but who will also evaluate your driveway for other maintenance needs that need to be addressed before you perform this necessary task.

Article Source: https://www.homeadvisor.com/r/how-to-protect-your-driveway/

Will I See the Asphalt Repairs When They’re Done?

One of the most common questions that I'm asked is, “Will I see the repairs when they're done?” My answer is always the same - yes. It's impossible to match old asphalt using new asphalt, even with infrared repairs. How well a repair blends with the surrounding asphalt depends on one main factor, how many times the surrounding asphalt has been sealed. Each time you sealcoat your asphalt, the voids between the aggregate get filled in a little more. The more times a driveway has been sealed, the less texture it has, leaving little chance it will match up with new asphalt that has more texture. Just imagine your old driveway next to a new driveway, that's the difference you will see.

A follow up question I hear a lot is, “Won't it blend in after I sealcoat?” It will blend better with a sealcoat (same color), but the textures will still be different and the repairs will be visible. Asphalt surfaces that have only been sealed a few times can eventually blend in pretty well with a few sealcoats, over a few years. If a new driveway is what you're looking for, you’ll need a paving company that can give you a new driveway. Infrared repairs are a nice option if a large portion of your asphalt is in good shape and you can accept that the repairs will not be invisible.

Article Source: http://www.asphaltadvisor.com/2013/07/will-i-see-asphalt-repairs-when-theyre.html

Vaca Vet Striping Services: Grading & Excavating

http://vacavetstriping.com

If you’re looking to increase your property value and curb appeal by dressing up your driveway, fixing an irritating drainage problem, enhancing the aesthetics via site grading we got you covered!

Vaca Vet Striping has over 30 years experience doing business as ACE Paving Company, with a General Engineering Class A Contractor’s License #389714. We strive to provide quality work and great service at an affordable cost. Vaca Vet Striping service area is Solano, Napa, Yolo, and Sacramento counties.

Why You Sealcoat Your Asphalt Driveway

Do you own a commercial property with an asphalt parking lot or a private residence with an asphalt driveway? If you do own or manage some type of asphalt pavement you will need to take proper care of the surface. In the long run, it will save you time and money. While taking proper care of the pavement does have some cost associated with it, it is not near the cost of having to later fix any damage that has already occurred to the asphalt. If you notice that you already have potholes or large cracks starting to appear, it is in your best interest to address the issues as soon as possible.

The first step in maintaining an asphalt pavement is crack sealing, crack sealing prevents water from entering the pavements sub-base through cracks in the asphalt surface. If these cracks are left untreated they will eventually turn into potholes and destroy the asphalt surface and the base beneath the asphalt. Once you allow this to happen there is no maintaining the asphalt, you are now looking at having to replace the pavement. It is important to clean the cracks thoroughly before filling them. You will need to clean out any and all debris. This will help ensure the material adheres to the surface correctly. Once all of the cracks are completely cleaned and filled with the asphalt fill material, water will no longer be able to enter beneath the pavement down to the sub-base material. By using this technique you have increased the lifespan of your asphalt pavement in the most beneficial and cost-effective way.

Sealcoating your parking lot is definitely a great way to protect your asphalt surface as well. Sealcoating your asphalt will help protect against the suns ultraviolet rays and also keep any water from entering small cracks in the pavement. The asphalt sealcoating material needs to be mixed to the manufactures specifications. The sealcoat material needs to be applied in two coats. The first coat of sealer should be applied with a squeegee to push the sealer into the cracks of the pavement. The next coat may be applied using a spray technique. The spray of the sealcoat ensures a uniform coat over the entire asphalt surface. Be sure to allow the proper drying time of the sealcoat before using the asphalt pavement. Sealcoating of the asphalt surface should be done as necessary to help ensure the lifespan of your asphalt surface.

Article Source: http://EzineArticles.com/6173707

Parking Lot Striping and Maintenance Increases Customer Safety

In business, it is important to always put your best foot forward, and that step can start with fresh parking lot striping. Fresh paint provides a good first impression for arriving customers. Faded and cracked lines, potholes, and crumbling chocks are not only an eyesore, but can also be a safety hazard as well. To ensure customers can park their cars with ease and navigate the car park without any confusion, regular maintenance is crucial.

Clear parking lot striping will not only help visitors navigate easily, but well-planned spacing can also help maximize a small area, squeezing in extra spots for cars so that you don't unintentionally lose business. Most car parks are also required by local regulations to meet certain codes which include a specific number of designated handicap spaces for disabled individuals (how many will depend on the location and size of the area). These will require an extra wide border to be clearly marked, allowing for room to remove wheelchairs or other necessary mobility devices. Codes may also require specific stenciling and marked fire lanes.

If the area is jointly operated by several businesses, it can be helpful to designate specific spots directly in front of doors exclusively to one shop. This is particularly useful for quick-stop stores located next to businesses with longer transactions such as restaurants or movie theaters. Keeping a few spaces free and marked for fifteen minutes or less is another way to keep traffic flowing, turning away fewer customers during peak periods. Spaces can be stencil-painted and bordered in a different color to distinguish it from others.

Proper parking lot striping is also a valuable safety tool that can help you cut back on collisions, slip and falls, or other potential hazards. In addition to keeping the paint fresh and direction arrows clear to improve traffic flow, consider re-paving the entire car park if it is extremely damaged. Large holes and cracks can not only damage vehicles, but people can fall and hurt themselves. And if it happened on your property, you may have a lawsuit on your hands. Smashed chocks are another common problem that is often overlooked. Chocks are the bumpers located between spaces or in front of sidewalks to prevent vehicles from moving too far. Over time, the constant stress from car bumps, or even just a single hard hit can result in them cracking and shifting. The rubble left behind can be dangerous to pedestrians and cyclists.

Parking lot striping professionals generally offer several other benefits in addition to their painting skills. Included in their services are often a cleaning of the area using power washing to lift and blast away long-standing grime, a basic warranty covering unexpected fading or stains for the first few months or longer, and help re-planning the area if needed. Most paints are fast-drying, so you won't have to worry about closing off the area for long. Always choose a company that is licensed, experienced, and fully insured so that you will receive quality work that you can depend on.

Article Source: http://EzineArticles.com/6657078