Asphalt - To Seal or Not to Seal, That Is the Question

It's a tragedy! You can find it everywhere, black and smelling like a new parking lot with lines so yellow and straight. But wait, upon closer examination the secret reveals itself. This is not a new parking lot, but a newly seal coated parking lot. Upon even closer examination, the new coat is concealing even more. Like a reptile hiding in the shade you can barely see it, but it's there. Alligator cracking, pot holes, and raveling oh my!

This is an issue that comes up with a majority of customers. Many want their parking lot to glisten in the sun and impress their customers, employees, and neighbors. The easiest and least expensive way to do this is seal coat. While this is not necessarily a bad thing to do, it might not be the wisest choice when there are other issues present. In order to continue, I need to dispel a few seal coating myths:

1. It will prevent moisture from entering cracks
2. It will extend the life of your parking lot
3. It will always be the cheapest solution

Myth: It prevents moisture from entering cracks.

Crack filling prevents moisture from entering cracks.

Myth: It will extend the life of your parking lot.

While there are many aesthetic benefits, sealant acts like a layer of paint. It functions more as an "eye pleaser" than improving the overall structure of the asphalt. Some may argue that it protects the asphalt surface against UV rays, chemicals, and oils. This statement does have some truth to it. UV rays will oxidize the surface of asphalt and will show up by the surface changing color. Seal coat's thin layer partially protects against oil spills and chemicals. I say partially because seal coat will wear away in a short period of time depending on damage from the snow plow etc. Oil and chemical spills won't structurally affect the asphalt, but the surface may "pit" and look aesthetically unpleasing.

Myth: It is always the cheapest solution

Some may try to sell seal coating to a customer using the previous two myths as reasons why they should apply seal coat. While this option is cheaper than structural repair, costs can add up over the long-term especially when seal coat only lasts about 2-3 years. The budget process becomes a balancing act of what should be done. A structural repair does not look as nice nor will it be as painless as simply seal coating. If there is a choice between structural repair and seal coating, structural repair most always should be chosen. If repair is too expensive and maintenance is still a priority, choose to crack fill and protect the structure of the asphalt.

Of course, it is all a matter of preference. A newly sealed lot can boost the look of a business, raise the morale of the employees, and impress customers. When deciding; "to seal or not to seal", remember "tis nobler to understand thine options than to purchase blindly."

Article Source: http://EzineArticles.com/expert/Ron_M_La_Porte/1550902

Article Source: http://EzineArticles.com/7632617

Give Your Driveways a Strong Foundation With Paving Contractors

Paving is really such an essential activity covered under the construction task which can't be ignored. It has its own significance in residential, commercial and industrial sectors. In residential infrastructures, the paving services are meant to enhance the safety, security, privacy and beauty of homes. Whereas, in commercial and industrial sectors these services are intended towards the beautification of buildings. In commercial constructions, their prime aim is to enhance the looks of offices or buildings by adding more charm to its beauty.

In this article, we will discuss about some of the high-quality and eminent professional paving services offered by flourishing paving contractors. Some of the paving services offered by reputed and professional firms include:

Construction of curbs

If you are in trouble due to curb distress or damage, then don't worry as professional paving service providers also offer you quality curb construction under which they will provide you with construction, repair and maintenance services.

Construction of parking area lots

Paving contractors provide construction, repair and maintenance of parking area lots. Construction of parking lots requires durable and fine-quality materials, which are only provided by professional paving service providers. Paving contractors are aware of this fact and that's why use only latest, robust and long-lasting materials in construction so as to ensure the longevity.

Patching Services

Patching is also one of the important activities in paving. It is a kind of temporary repair work carried out on pavements, parks, speed bumps, parking area lots, driveways, walkways, etc in case they are damaged due to some reasons. Reliable and top-notch paving service providers make use of premium quality patching techniques to attain the best results.

Construction of driveways

Driveway construction is also one of the significant activities performed in residential, commercial & industrial sectors for the construction of sturdy, rock-solid, beautiful and impressive driveways. As per the needs, requirements, interests and financial plan of the customers, paving contractors built almost all the popular types of driveways including concrete driveways, stone driveways, asphalt driveways, and so on. Moreover, they also provide driveway cleaning, repair and maintenance services.

Apart from these above mentioned paving services, there are other commercial paving services as well that include curbs, crack seals, road work, patching, schools, municipalities, speed bumps, driveways, parking areas, parks, retail centers, gravel work, office buildings, tennis courts, shopping malls, etc.

What are you waiting for?

Before it gets too late and situation becomes worst, it's better to take help of paving contractors. Go through various web portals to find the best paving contractor.

Article Source: http://EzineArticles.com/expert/Aaklin_Decosta/599249

Article Source: http://EzineArticles.com/6720005

Asphalt Paving Contractors - Ensure A Quality Paved Driveway

The majority of asphalt paving projects are larger commercial jobs. That doesn't, however, mean that such contractors do not take up relatively small jobs like residential parking lots, driveways, and condo units. Most of the times, private homeowners do not have the relevant experience or expertise to handle such projects without the supervision of large contractors. The following tips will surely help to obtaining quality work and choosing a reliable asphalt paving contractor:

Select contractors that are well-known for their quality - How can you ensure that the contractor you're opting for is a reliable one?

* Their names must be listed in the phone book or online.
* They must have an insurance certificate to their name.
* They must have some pictures related to their previous jobs and work locations.
* They must have host of testimonials to their credit.

These credentials should be found easily today by most contractors. They are well-aware of the tough competition and keep these materials handy. But then how can you distinguish the best from the not-so-good ones? You can ask them some more probing questions:

* Are they aware of the latest technologies and techniques?
* What kind of customer services they provide before or after the job is done?
* Do they offer any kind of value-added services?
* What is the communication process they follow with their clients?
* What is their definition of quality of the products or/and the services they offer?
* Do they have well-equipped sales personnel that can provide clear benefits as well as options of various approaches that they adopt towards repair?
* How long they have been in the business?

Carry out some comparison shopping - You need to obtain proposals from more than one contractor. In the mean time, you must clearly identify whether all the contractors are using the same products for the job. Also check on the time that each of the contractors have estimated to complete the job. If a contractor is offering a strikingly low rate, then you must carefully examine the kind of products they are using for the job. It is a known fact; you get what you pay for.

Insist on written agreement - If the contractor is offering you some kind of guarantee with his work, make sure you have it in the form of a written agreement. If possible, hold back a fair portion of the job amount till you ensure the quality of the job matches your expectations.

Article Source: http://EzineArticles.com/?expert=Peyton_Stallings

Article Source: http://EzineArticles.com/5561571

Considerations For Resurfacing Asphalt Driveways And Parking Lots

Resurfacing or replacing of the material of a driveway or parking lot may be necessary after a period of time. This is quite different from sealing or other types of minor repairs. Although resurfacing will not last as long as the installation of new asphalt, it is an option that is considered by a lot of people because of financial concerns. As in most repair projects, the finished job will be determined by the level of preparation and the competence of the contractor.

In a complete tear-out, the old drive will have to be removed by the contractor. An initial layer of compacted gravel will then be applied, followed by a course of compacted asphalt base. This layer is usually about two to four inches in thickness. The final layer of compacted material will then be applied.

During the process of resurfacing, the surface course of asphalt is installed on top of the existing surface of the driveway or parking lot. The two layers will adhere together easily because they are made with the same material. It is however important to consider why the driveway is failing before you choose this option. For instance, if the problem is from a weak base, adding a new layer will not be the right solution.

Asphalt can also be installed on a concrete drive. You do have to implement certain precautions so as to ensure that the concrete does not shift under the new surface. Proper preparation will ensure that this does not happen and the drive will last for several years. There are a number of things that you have to check in order to know if the existing concrete driveway is suitable. The blocks should be level, and the joints and cracks must be close.

No matter the type of installation that you want to do, there are certain things that you have to watch for. Drainage should be taken into consideration so that rain water is carried to the street or to a catch basin. Water should not flow back into your garage or onto a neighbor's property. The contractor has to also ensure that the edges are properly supported.

It is vital to choose a competent contractor for your asphalt resurfacing project. You can evaluate the company's work by checking other driveways that they worked on a few years ago. No matter the company that you choose, make sure that a proper contract is drawn up.

Article Source: http://EzineArticles.com/expert/Louis_Reyes/1437628

Article Source: http://EzineArticles.com/7440889

Sealcoating FAQs

Making an educated decision about maintaining your facility's asphalt surfaces can help prevent you from paying too much, getting a poor quality job and making a bad decision. Here are some commonly asked questions about seal coating commercial asphalt:

What if the price is too good to pass up?

Although a low price bid may be tempting, making an impulsive decision based solely on price can cost you later. Save money by hiring a reputable, paving or seal coating contractor. Make sure the company is well established - do they have a local address, a well-developed website and references? Also, it doesn't hurt to get several bids and check each company out thoroughly. Be sure to keep in mind, you usually get what you pay for!

Should we have this sealant applied every year?

No! Although many paving companies may lead you to believe that you should seal coat every year, seal coating your asphalt too much can lead to problems. The first two coats of sealer applied to your asphalt are what protect it. Additional coats are usually just for cosmetic purposes.

Should we seal our asphalt in the summer?

It is not appropriate to seal coat asphalt in hot weather. The sealer will dry too quickly causing it to peel, flake or get streaks in the finish. If the job needs to be done in hot temperatures, above 90 degrees, a good paving contractor will spray the surface with a light mist of water to cool the asphalt before applying the seal coat. Doing so will cool the surface considerably. Ideal temperatures to apply seal coat are between sixty and ninety degrees.

Can we just seal coat asphalt pavement ourselves?

Adding up the total costs of undertaking this project will give you the answer to this question. Basically, it's going to end up costing you more and you more than likely will not be thrilled with the results. Not only will sealer, sold by the pail, cost as much as five times more at local improvement stores, it is not the high quality as professionally mixed commercial sealer. Tools are often expensive and may not be of professional grade to perform the task properly. Prior to seal coating, the surface must be cleaned - a leaf blower and a hose won't give the professional results of a commercial blower and washer. Add in your labor time, and the fact that you'll probably ruin your shoes, shirt, pants and gloves - it really adds up. Using a professional, paving and seal coating company will only cost you a few dollars more that it would to do it yourself, and you'll be much more satisfied with the job when complete.

A well-paved asphalt surface can last 20-40 years if maintained at proper intervals. Save money by hiring a reputable, paving or sealing contractor. They can develop a strategy to maintain your pavement. Spending a little more now, can save you a lot down the road.

Article Source: http://EzineArticles.com/?expert=M_McHale

Article Source: http://EzineArticles.com/7345709

More Than Just Price - Choosing a Paving Contractor to Install Your Driveway

Paving an asphalt driveway may seem like a simple task to some people. Basically you just get a couple of companies out of the phone book to give you an estimate and then pick the cheapest one right? Well, not if you're concerned about the craftsmanship or making sure you get what you pay for. This is the number one mistake people make when choosing a contractor. Before you call any company do some research first. Information is readily available 24 hours a day on the web. Stay away from people that knock on your door. You will never ever get a good job from someone telling you he has an extra load of asphalt from a job up the street. These people are called travelers and never deliver on what they promise. There is plenty of info on the web regarding these types of people.

Try to zero in on companies that specialize in residential asphalt drives. Commercial contractors excel in putting down lots of asphalt really fast, but usually fall short of a homeowner's expectations when it comes to details. Review a company's website, check them against the BBB or other reporting agencies, and compare your notes about your research. When you look at their website, be sure to pay really close attention to the details you find both in the content and in the pictures on the site. You want to see what kind of work they are capable of, and you want to be confident they fully know what they are doing. You'll also be able to make sure they have adequate equipment if they have good pictures. Once you have 1-3 good companies with a clean history and a good reputation now is the time to talk to them and request a bid. Always get a written proposal. This makes sure both parties' expectations are clear and known. It also helps protect you if a legal matter ensues.

When reviewing the bids pay close attention to the entire proposal; including the letterhead that it's composed on. Sloppiness or inadequacies on paper now may be what you'll get on your asphalt driveway too. Be sure that everything you expect from your paving project is included in the scope. Make sure you understand everything that is taking place. Be sure you understand how the job will be scheduled, how thick the driveway will be after the asphalt is compacted, how much rock will be installed prior to paving, and the dimensions or square footage. Signing a contract means you have accepted what is in writing. If something is left out, make sure you get an amended contract.

Before you sign a contract you should take some time and use good judgment to compare the estimates. Price should never be your number one concern. We'll discuss price in a moment. Take an opportunity to ask a contractor for referrals that best match the design of your job. Some companies keep a cheat sheet of their best referrals, but you should insist they provide you with 1-2 jobs nearby that best match your own asphalt driveway. You want this because you should be inclined to physically investigate what kind of work they do. Ask about jobs they might be doing in the area so you can personally witness them while in action.

How do you know what to look for when looking at a referral driveway that a company has already completed? Here are a few great tips that will bring you up to an educated level.

· Check all the transitional areas such as sidewalks, garage floors, and streets. These should all be flush, with no bump, and should have the proper thickness. Without these details you will see water problems, or unraveling of the asphalt. These symptoms only get worse as time goes on.

· Streaking or pock marks are a good indicator of a thin surface. This happens when there is not enough material to encapsulate the larger stones while paving. The larger stones will tumble and cause imperfections in the surface, or "mat".

· Seams and joints should be flush with each other, and barely visible (if at all) to an untrained eye. Seams and joints that are severely visible or are not evenly matched will fail prematurely.

· Exposed edges of the perimeter should be properly constructed. This is where most companies sink or swim. You should pay most of your attention here. Stand back and carefully look at the edges from a distant point of view. You should observe several aspects: The edges should be either in a perfectly straight line, or consistently "flowing" with the turns. The edges should be properly shaped, beveled, or tamped in a consistent looking 60 degree angle. The edges should be compacted properly without looking "squashed" from the top. Without these characteristics you will have problems later and it just doesn't look as good as it should.

· If you look at the job after a rainstorm, be sure there is no considerable ponding, or puddling of water. If you do see water spots you can quickly deduce if they are too deep by measuring them with a coin placed flat in the water. The water should not be deeper than the coin.

· Last but not least, if the driveway was paved recently look for trash or debris left behind. This will indicate the level of cleanliness the crew is at.

You should really focus on the importance of inspecting past jobs by the company before spending your own money on having your asphalt driveway paved. By printing out this guide you can take it with you to create a checklist to write notes and comparisons on. Once you have done this, talk to the home owner and ask how their experience was with the firm. If you are diligent about researching your contractors prior to hiring them, you nearly eliminate the chance of getting a bad asphalt driveway. It's your money, be sure it's well spent.

Certainly ask your contractor about asphalt prices. Since early 2008 prices have gone up and down every month (typically up). Most paving contractors will not absorb a price increase. You and your contractor need to be in agreement with what will happen in the case of rising material costs.

Since we are on the topic of price now, let's explore a few matters. There are a few ways of eliminating contractors before price. Be sure they are completely aware of your expectations. Have they presented you with a solution that gives you the absolute best return on investment? Does their reputation meet what you are looking for? If you have done your homework and still are lucky enough to have several contractors to choose from, price now becomes an important focus. Ask about available discounts. Typically, discounts are usually for cash payment, multiple jobs done at once (i.e. neighbor also needs a driveway), senior citizen, or repeat work. Also inquire about getting free or discounted maintenance packages once they have completed your driveway. Ask about including other options such as crack barrier or curbing at a lesser amount. Before asking a contractor to directly drop his price, be aware of several things. If you have found a very good contractor, chances are they are very passionate about their work and may feel a bit insulted if asked to match another company's price. If you ask them to match a price and they feel as though their competition is as good as they are, a price reduction might be made to try to satisfy you. Be very considerate when asking for a direct reduction. These days it's very expensive and stressful to operate a successful paving operation. The last thing you want to do is cause your contractor stress that may influence how your driveway is constructed.

Article Source: http://EzineArticles.com/?expert=Richard_Dinkela_II

Article Source: http://EzineArticles.com/1882883

Between Asphalt And Concrete, Why Are You Choosing Asphalt Paving?

Paving experts are choosing asphalt for the pavement job because of its numerous advantages. Asphalt actually is being the chosen material in lieu of the concrete or cement in residential, commercial and industrial set-up. This is being preferred for two reasons - cost effectiveness and durability. More than being cost-effective, asphalt is more time effective than cement. By this we mean that the asphalt material is easier to prepare and dry. Thus any paving or mere repair can be easily accomplished thus making the driveway easily useable.

Paving experts have very important roles in the beautification of the exterior part of your home. The value and beauty of a house does not only come from what you see inside. There are a lot of things that can be attributed to your house exterior. These are the backyard, the garden, the pool (if there is one), the lawn and of course, the pavement and the driveway. The outdoors adds value to the house and you cannot disregard the importance of having a well-paved driveway to the appearance of your home's exterior.

For paving, there are two usual choices, the asphalt and the concrete. You will find that there used to be more people going for concrete pavement. However, in the present, more and more architects, engineers and home designers go for the asphalt pavement due to its numerous advantages. Asphalt actually is now being the chosen material in lieu of the concrete or cement in residential, commercial and industrial set-up. This is being preferred for two reasons cost effectiveness and durability.

You might have pinpointed these two big reasons for the choice. To understand better the individual choice for asphalt, it is paramount that we give the details of the advantages. More than being cost-effective, asphalt is more time effective than cement. By this we mean that the asphalt material is easier to prepare and it is easier to dry. Thus any paving or mere repair can be easily accomplished thus making the driveway easily useable.

Asphalting is more cost-effective in its initial cost as well as its maintenance cost. Starting with the paving job is less expensive than using cement. Any construction job needs to be maintained. And the cost of maintaining this is cheaper than concrete maintenance. With a hole or a crack, application of asphalt in the damaged parts is cheaper. And again, as you do the repair, the advantage of time-effectiveness will come in. The ease in drying makes the repaired driveway useable at once.

Another advantage credited to asphalt is its flexibility and pliability which makes the material easy to mould. Because of the ease in its use, cost-effectiveness will come in. You will require less labor in the construction and restoration of any asphalted pavement and driveway.

Now we have the durability advantage. In comparison to the concrete paving, the cement easily cracks thus will require more frequent sealing. In as much that damages easily occur on concrete paved areas, the cost effectiveness of cement goes down. This further gives you the ideal that concrete pavement is less prone to wear and tear. More support to the durability of asphalt is its weather-resistant feature. The asphalt is more adaptable to any climate change. For the cement, drastic changes in weather can result to susceptibility to cracks and other damages.

In the past, concrete paved outdoor area is the common choice of many homeowners, business establishment offices and industrial work area. With the frequent use of asphalt in paving, the architects and engineers had proved that asphalt material is more beneficial cost and durability wise.

Article Source: http://EzineArticles.com/?expert=Rhodes_Huff

Article Source: http://EzineArticles.com/7375898

Asphalt Paving Companies - Things to Know Before Calling for a Company

Asphalt pavements have the worst kind of treatment. With time, they start to weather. This often leads to creating mishaps while driving. A clean pavement is not seen much these days, and not many people are aware of asphalt paving companies. A perfect driveway with clean boundaries and a perfect landing for a car park is very much in need.

Most city streets have existing asphalt paving but they are not maintained properly. With natural pollutants such as smoke, air and rain, the pavements get corroded and the asphalt layer soon erodes off. A new coat of asphalt not only evens out the driveways but also ensures a safe and smooth journey. But have you ever wondered what it takes to zero on the right asphalt paving company for your project? It is no doubt a cumbersome job, but a little effort from your end will help you put your worries at bay.

For all driveways, the length and width is measured before getting quotes from various asphalt paving companies. The measurements are taken and the driveway is cleaned to remove dust and dirt for easy layering of asphalt over the existing layer. Most of the contractors quote estimates based on the exact measurements taken from the driveway. For repairing an existing driveway, the old layer of asphalt is scrapped off and the surface is cleaned and polished to put a fresh coat of asphalt mix.

If you had never installed a driveway earlier, you must remove all the grass from the respective area. There should be nothing but flat dirt in the region where you wish to install your driveway. If the dirt foundation is not strong enough, you should prepare one to avoid the asphalt from cracking with the passage of time. Without making a good foundation for a driveway, calling for an asphalt paving company will not be of much use. When you are done with making a strong base, invite quotes from different companies.

The asphalt contractors quote estimations based on the current cost of asphalt, labor charges, material costs and the overall expense for paving the driveway. The client can oversee a few more quotes from various other asphalt paving companies and make a better choice based on the estimate that tallies with the preferred budget.

Article Source: http://EzineArticles.com/expert/Peyton_Stallings/832472

Article Source: http://EzineArticles.com/5439966

Benefits of Installing an Asphalt Parking Lot for Your Business

If you are a business owner, chances are that you have given the interior of your business more weight in terms of finishing and overall appeal while you have neglected the surrounding areas. Even then, you will be surprised to learn how important the facade is when it comes to attracting customers.

As such, it is advisable to pay attention to the exteriors, such as driveways by making them appealing to the eye. In most instances, the majority of residential and commercial driveways are finished with concrete or asphalt. Asphalt is particularly a preferred choice for many people, as it is about 30-40 percent cheaper compared to concrete.

The benefits of asphalt are much greater than concrete. Here are some reasons why asphalt driveways are a must for your business:

Flexibility – When compared with concrete, asphalt is more elastic and able to withstand severe weather conditions. The liquid asphalt component allows asphalt to remain flexible, and better able to handle expansion and contraction.

Resilient – Asphalt is best equipped to withstand wear and tear resulting from high traffic that is common in many commercial establishments. Furthermore, it requires less maintenance making it an ideal choice of materials for your surface.

Aesthetic value – Not only does asphalt have a smooth surface, but it also looks cleaner. Asphalt can also be freshened up with a coat of asphalt sealer, restoring its original appearance. In addition, it is liquefied making it customizable. Thus, you can easily stamp in designs as well as decorations.

Environmental friendly – Asphalt driveways contain reclaimed asphalt pavement (RAP) that is 100% recyclable. RAP refers to old asphalt that is usually milled from pavements that have reached the end of their service life. Asphalt binder is used in the RAP meaning that a minimal amount of virgin asphalt and petroleum are used. Consequently, less mining aggregates are used. Other environmental benefits include cooler asphalt temperatures and reduction of storm system basins. Moreover, when in its porous form, asphalt requires less energy for manufacturing, significantly reducing odor, emissions as well as smoke.

Economical – Asphalt paving is usually less costly upfront compared to concrete paving. In addition, choosing asphalt for your driveway is cost effective in the long run. That is, it reduces the overall lifetime cost of a paving project. Asphalt helps to reduce the demand on storm sewers effectively eliminating some of the local government impact fees. Apart from quick installation that allows traffic to return in the shortest time possible, the long-term repairs and maintenance costs of asphalt are also low. On the other hand, concrete takes long to lay and set, thus can result in loss of business. In terms of repairs, a crack on asphalt can be repaired inexpensively and quickly.

Versatile – The installation of asphalt driveways can be done over time depending on availability of funds. Thus, when traffic loading increases, installation can be done at night or during off-peak times when there is minimal disruption of traffic. Asphalt layers may be on a needs basis.

Safe – Asphalt driveway construction can only mean shorter lane closures translating to more safety for vehicles as well as workers within the work zone.

When completed, asphalt driveways offer other benefits over concrete driveways that include the following:

• They are skid resistant as they offer high friction due to the use of durable aggregates.
• The surface is smoother compared to cement.
• The surfaces greatly reduce the degree of spraying and splashing during storms. This improves driver visibility.
• The black asphalt surface also aids in visible delineation of pavement markings and lanes.

Investing in an asphalt driveway is a good move as the benefits far outweigh the initial investment. If anything, asphalt driveways will attract potential customers to come to your business where they can engage you more thus, adding value to your business.

Author Bio:
Sam Wade is an innovative digital marketing manager designing end-to-end marketing campaigns or Jackson Asphalt. His expertise lies in developing unique marketing processes that ensure continued growth and development of the business. Sam has successfully led the marketing team of Jackson Asphalt with his knowledge and experience.

Article Souce: http://www.asphaltadvisor.com/2016/05/benefits-of-installing-asphalt-parking.html

Why Sealcoat My Asphalt Parking Lot Or Driveway?

Sealcoating your asphalt parking lot or driveway will protect your expensive asphalt investment saving you thousands of dollars. This simple periodic maintenance can double the life of your pavement and reduce the likelihood of larger repair issues, while providing a jet-black finish for your asphalt that will beautify your home or business. This simple, low-cost procedure can save you a significant amount of money in the long run by eliminating the need for more extensive and costly types of services such asphalt repairs, paving, asphalt overlay and crack repairs. Sealcoating asphalt pavement with coal tar emulsion sealer slows pavement deterioration by protecting against the enemies of a parking lot or driveway.

The three major elements that deteriorate asphalt are:

1. Sun and Oxidation: Sealcoating prevents oxidation and resists ultraviolet rays. Asphalt pavement begins to deteriorate almost as soon as it is placed. As the pavement is exposed to oxygen, the asphalt binder (tar) hardens. This hardening results in a brittle surface that eventually cracks. Cracks in the pavement enable oxygen and rainwater to penetrate the pavement, often into the sub base, weakening it and reducing the pavement's strength. Sealcoating protects the surface and fills surface voids, reducing pavement's exposure to oxygen and water and extending pavement life.

2. Water and Ice: Sealcoating resists water & ice. The sealer provides a protective shell that prevents water from penetrating through the asphalt. Water will soften the base causing larger more expensive repairs such as sink holes, depressions and cracks. In colder climates, the water will freeze and expand which will create pot holes and cracks throughout the asphalt. Sealcoating your parking lot or driveway can save you a significant amount of money by preventing water and ice from penetrating the asphalt surface.

3. Oil & Gas Spills: Sealcoating resists oil and gas spills. This is especially important on driveways and parking lots where cars are parked or worked on. Oil and gasoline soften asphalt. A professional-grade coal tar sealer contains additives that enable it to resist any such leaks. By filling surface voids, sealcoating also reduces the depth to which oil or gas can penetrate the pavement.

Sealcoating will help protect the asphalt from harmful elements and enhance the curb appeal of your home or business.

Article Source: http://EzineArticles.com/?expert=BJ_Reedy

Article Source: http://EzineArticles.com/1953324